|
Post by dancebeatfm on Aug 9, 2018 14:20:27 GMT
Hello, i was unable to program remote key in my Audi. In my case remote is programming in block 46, adaptation channel 21 So, in block 46 in adaptation channel 00 i cant do factory defaults, when i press the round button with check in it or press and hold button in OBD eleven app, the app show's me red line 00 function is not available, ok, go to adaptations in 21 channel, in the field i write 1 (number of keys) i press the button once and press and hold it and OBD eleven app shows me red line 00 function is not available, what is wrong i dont now.
With Vag-Com i have succcess to program remote key.
|
|
jay31
New Member
Posts: 3
|
Post by jay31 on Oct 9, 2018 23:07:48 GMT
Not sure if you found a solution in the interim, but you should try what I did to see if you can get your remotes to pair. I posted my solution here: forum.obdeleven.com/post/19946/thread (I added it there because some of the attempts inspired my solution)
|
|
audia4b6
New Member
Security Log
Posts: 5
|
Post by audia4b6 on Aug 7, 2019 0:40:46 GMT
Seems there is little help in this forum. But have some of the same problem. Managed to delete both keys so have spent eternity of browsing to find a solution. None of what I found to solve the problem seemed to work. But after a bit of luck of random press one key seems to work but not the other. But have found a video that says you should delete app data on OBDELEVEN if a red line 00 function is not available.
|
|
audia4b6
New Member
Security Log
Posts: 5
|
Post by audia4b6 on Aug 12, 2019 17:44:58 GMT
(46) Central Module Comfort System
Adaptation Channel 21
Old value. 0
New value. 4
(46) Central Module Comfort System
Adaptation Channel 21
Old value. 0
New value. 3
Doing this worked for me after I had first added new value 5. This Deleted them old posisjon For Keys .
In live data you kan push the Buttons on the remote while it's in the on position to see if the buttons work and change number in live data
|
|