|
Post by vwclubsport on Aug 7, 2018 12:21:35 GMT
Good day, I have a question, is it possible to code it with OBDeleven, that both "U" would be on, not just the side ones, or it's not possible?
|
|
|
Post by dv52 (Australia) on Aug 7, 2018 12:39:31 GMT
^^^ I could be wrong, but I had thought that the inner "angel-eyes" on a GTI doesn't have any internal comportments to light-up (unlike the Golf R that has the twin angel-eyes on either side).
Don
|
|
dazz
New Member
Posts: 12
|
Post by dazz on Aug 8, 2018 6:57:30 GMT
Good day, I have a question, is it possible to code it with OBDeleven, that both "U" would be on, not just the side ones, or it's not possible? I've been trying to do the same thing on my Passat B8 R-Line. I also think that people with the Tiggy may want to do the same as I see have similar headlights in the R-Line with LED.
|
|
|
Post by vwclubsport on Aug 8, 2018 15:03:50 GMT
Yeah it would be very nice if it's possible.
But maybe it is connected to light package in the car?
|
|
mamoo
New Member
Posts: 15
|
Post by mamoo on Aug 13, 2018 7:20:38 GMT
Nope not possible at all, the inner U is a dummy... I retrofitted my CS with 7R headlights, some coding change(to let the car know its got LEDS for indicators) for the indicators and it works...
the only thing that does not work just yet is the AFS!!!! its a PITA.....
I tested the function with OBD11 and the lights light up.... but cant seem to get it to work when turning the steering wheel. but i will dig deeper...
|
|
dazz
New Member
Posts: 12
|
Post by dazz on Aug 14, 2018 7:04:34 GMT
mamoo,
What coding did you do for the retrofit 7R lights?
Do you have a photo of the headlights?
Dazz
|
|
mamoo
New Member
Posts: 15
|
Post by mamoo on Aug 14, 2018 13:18:16 GMT
Dazz... I only ever changed the indicators settings to reflect the LED front indicators instead of the halogen bulbs. But please also remember that I had the Xenon lights already installed on the ClubSport... so it was virtually a swop with only the additional internal U lighting up and the the LED indicators... I replaced: 5G2 941 751A 5G2 941 752A With: 5G2 941 751D 5G2 941 752D (09) Central Electrics Leuchte 0 BLK VL B36 (Left front indicator) Lasttyp 0 Old Value - 12 Blinkleuchten New value - 6 LED Lichtmodul Leuchte 1 BLK VRB 20(Right front indicator) Lasttyp 1 Old Value - 12 Blinkleuchten New value - 6 LED Lichtmodul Even without changing the settings above, the indicators had this weird pulsing/strobing effect but as soon as you change the setting to LED, then it becomes a solid "on" and a solid "off" As I indicated above, I still need to figure out how to get the cornering lights to work.... I did however test that the cornering lights infact do operate or light up (its an incandescent bulb as opposed to an LED) via the output test procedure under module 55 "Headlight Regulation". so i am still lost...
You will notice that I changed the red insert in the grille to the R brushed aluminium strip for completeness, I couldn't handle the red changing to brushed aluminium Attachments:
|
|
dazz
New Member
Posts: 12
|
Post by dazz on Aug 15, 2018 7:02:20 GMT
thanks mate
|
|