|
|
Post by mesiste on Nov 10, 2019 13:18:03 GMT
Can you help me? I need to code my high beams to work with LED. Any info much appreciated.
|
|
|
|
Post by barttarah7 on Apr 20, 2020 20:16:23 GMT
Have led rear lights fitted in car working properly but when I press the brake just the 2 under the brake lights don't work why is this
|
|
|
|
Post by elinterneb9 on Apr 26, 2020 20:37:11 GMT
Hello everyone, I have checked the thread and it is not very clear to me, I have a 2018 Audi A1, I have changed the reversing halogen bulbs for some LED bulbs and I think of a molten bulb error, I have connected OBDeleven and I get into the module 09 but it doesn't give me the option to choose the bulb to “tell” it is led. I find what I attach in the image.-  |
|
|
|
Post by elinterneb9 on Apr 26, 2020 20:58:32 GMT
 I already tried and I get no answer. thanks for replying, i will have to put my halogen bulbs again ...
|
|
|
|
Post by sergiotfe on May 3, 2020 9:45:30 GMT
|
|
|
|
Post by sergiotfe on May 3, 2020 10:22:03 GMT
Gracias!! Sigue sin funcionar. Cuando uso intermitente izquierdo queda fijo el derecho iluminado y al revés. No encienden al abrir o cerrar el coche tampoco. Volante a la izquierda.
Me dice que compruebe antiniebla derecho cuando debería encender el izquierdo.
|
|
|
|
Post by sergiotfe on May 3, 2020 12:21:47 GMT
|
|
|
|
Post by sergiotfe on May 3, 2020 13:46:31 GMT
Lo siento, ahora no enciende ninguna luz, ni intermitente, nada de nada. Cómo puedo restaurar los valores originales??
|
|
|
|
Post by sergiotfe on May 3, 2020 16:51:50 GMT
Sí, incluso el fix de DAP para su adaptador de cables. Los faros instalados son los LED OEM y el cableado era el que tenía puesto con las bombillas añadiendo el adaptador de DAP. Volveré a revisar los valores en cada apartado, lo que siempre me saltará el error de intermitentes cada vez que los acciono.
|
|
|
|
Post by sergiotfe on May 3, 2020 20:21:27 GMT
Si! Gracias!! He vuelto a como estaba al principio. Funcionan las luces traseras pero salta error al accionar los intermitentes y no salta el antiniebla. Hay algún parámetro en leuchte23 y 24 que se me escapa...
|
|
|
|
Post by sergiotfe on May 4, 2020 15:30:11 GMT
Muchas gracias!!! Seguí los pasos, modifiqué el parámetro en Leuchte26NSL LA72-Lichtfunktion A 26 y ahora no me sale error por el antiniebla trasero. También establecí de fábrica la iluminación. Los únicos errores que me saltan ahora son los de los intermitentes derecho e izquierdo. Seguramente tenga que cambiar algún valor en Leucthe 23 y 24.
Saludos.
|
|
|
|
Post by sergiotfe on May 4, 2020 17:03:09 GMT
Empieza la carencia bien pero al tercer tono Salta "error revise piloto trasero derecho/izquierdo" Y la carencia suena más rápida. Por ejemplo, en lugar de 3 tonos pausados cuando lo acciones pasa a 6 rápidos   |
|
|
|
Post by sergiotfe on May 4, 2020 21:08:30 GMT
Vale muchas gracias!’ Qué valores he de poner en los intermitentes traseros??
Otra cosa. Se fue el error del antiniebla pero lo conecto y no se enciende...he de tocar algo más en ese rango??
Lo siento, Espero solucionarlo cuanto antes.
Saludos
|
|
|
|
Post by sergiotfe on May 5, 2020 15:50:46 GMT
He modificado los valores del 16 al 19 y nada. Al accionarlo se iluminan normal pero salta el error y el sonido es rápido (6 tonos en lugar de 3). Paso fotos del manual de DAP que seguí en su momento, ¿¿puede que el error haya sido haber tocado los Leuchte23, 24 y 27 como decía el manual?? SI te fijas en el manual del antiniebla me dice algo de codificar el byte 7 por "BIT4" pero no localizo dónde modificar eso.
Delante llevo los faros oem del mk7 2015, adjunto imagen también. Saludos     |
|
|
|
Post by sergiotfe on May 6, 2020 7:07:00 GMT
Vaya...que faena...entonces no me sirve. Lo único conectar los cables sueltos al conector original de mi coche? Programar después? Encima no me responden desde DAP...
Qué puedo hacer??
|
|
|
|
Post by sergiotfe on May 6, 2020 15:28:06 GMT
Gracias, probaré a contactar con ellos por si puedo dar con la solución. en DAP les he enviado correos y nada, no me responden.
Para el leuchte 26 que se encienda he de pasarlo a 34 o 38 que es tipo led en lasttyp? Algún ajuste más para dar la señal de que encienda?
Saludos
|
|
|
|
Post by sergiotfe on May 8, 2020 16:14:49 GMT
Muchas gracias!! Le echaré un vistazo a ver si me funcionan esta vez
EDITO. He intentado usar esa codificación, y ahora me salta nada más arrancar el coche el error piloto antiniebla derecho. No se enciende ni si quedan el antiniebla izquierdo y sigue saliendo el error de los intermitentes. Me puse en codificación extendida y marqué el bit4 que están sin marcar y nada,
|
|
|
|
Post by sergiotfe on May 9, 2020 10:42:03 GMT
Te paso capturas de pantalla del que he tocado. Los pasos de reiniciar el equipo multimedia sí, se reinicia y luego voy a "ajustes de fábrica" de iluminación. Hablé con esta gente y me mandan unos cables. Dicen que no he de cambiar parámetros de nada así que usaré el listado de antes y dejar todos los valores como me los pasaste al inicio.
   |
|
|
|
Post by sergiotfe on May 9, 2020 14:58:42 GMT
Vale, ahora he de buscar y corregir el byte 0 a como estaba. El caso es que le doy a la flecha derecha y el último movimiento que me deja es el byte 2...de ahí no me deja pasar hasta el 7
|
|
|
|
Post by sergiotfe on May 10, 2020 10:32:45 GMT
No me deja acceder hasta el 7. Sólo me deja llegar hasta el 02. El mío es un GTI MY2015. Cambié parámetro del 16 y el antiniebla sigue sin responder. Lo único sería conseguir los valores de cuando no tenía los led instalados sino los de bombilla normal y empezar desde cero.
|
|
|
|
Post by sergiotfe on May 12, 2020 17:43:31 GMT
YA..no caí en hacerle un backup y ahora no sé si pulsando y reiniciando desde el sistema y que vuelva a ajustes de fábrica hará que se reconfigure... Te paso la trasera con los faros que tenía montados antes:
Saludos!!
 |
|
|
|
Post by sergiotfe on May 14, 2020 19:55:28 GMT
Edito.no me sale el enlace del pdf. Podrías pasármelo de nuevo??
Muchísimas gracias!! Intentaré con eso y el cable que me manda esta gente. Ya te contaré!
|
|
|
|
Post by princeandel on May 15, 2020 9:43:25 GMT
Good day. I have a 2014 Golf Mk7 1.4TSI Highline from Japan. I installed the depo led taillights with harness. I used the app to code. But it was incomplete. I had everything but parking lights. I was able to figure out the park light and the reverse light and the brake light and the indicator on the inner lights. I now have two reverse lights. No rear fog. I cannot get the indicator on the outer lights. And whenever I press the brakes the hazard comes on. I have been at it for a few days now. Do you have an idea of how I can fix this? Thank you for your assistance in advance. www.dropbox.com/s/u58xqorjgssgwtp/Photo%20May%2008%2C%205%2020%2033%20PM.jpg?dl=0 |
|
vwb7
New Member
nothing for the us b7 2017 passat 1.8t r-line?? or am i just that dumb?
Posts: 5
|
Post by vwb7 on Feb 17, 2021 20:53:00 GMT
I'm dumb. That said, I have been looking for days on how to code out led's for reverse lights. US spec 17' Passat R-line. Best I have found is my car uses "channels" to access coding. Can anyone point me in a direction of where to start/look? This is all I learned at this point lol and I am not even sure I got this much correct...
"The basic problem is that you have been reading this thread which basically pertains to modules that use UDS/ODX protocols - whereas the equipment in your 2 x MY10 cars use older style control modules. Adaptation channels in these older style modules use numbers, not names! S0 - none of the stuff here is compatible, alas"
"Where I am getting stumped is I know I need to open Central Electrics (Module 9) and then adaptations, I am then presented with a menu that is asking for what channel to open"
If I high-jacked this, I am sorry, I just don't know where else to look, not trying to be lazy!
|
|
|
|
Post by dv52 (Australia) on Feb 18, 2021 20:55:48 GMT
I'm dumb. That said, I have been looking for days on how to code out led's for reverse lights. US spec 17' Passat R-line. Best I have found is my car uses "channels" to access coding. Can anyone point me in a direction of where to start/look? This is all I learned at this point lol and I am not even sure I got this much correct... hmm......... I suspect that you are not "dumb" (there's a huge difference between being dumb and simply not knowing stuff)!!- Perhaps "persistent", or "dogmatic", or "dedicated" - maybe?  "The basic problem is that you have been reading this thread which basically pertains to modules that use UDS/ODX protocols - whereas the equipment in your 2 x MY10 cars use older style control modules. Adaptation channels in these older style modules use numbers, not names! S0 - none of the stuff here is compatible, alas" Arhhh...... I see that you have quoted my words!!! My apology for not being clearer in my original response "Where I am getting stumped is I know I need to open Central Electrics (Module 9) and then adaptations, I am then presented with a menu that is asking for what channel to open" So, lets start with some "basics" - your " US spec 17' Passat R-line" is otherwise know as a Passat NMS model and it was specifically made for the North America and China markets. The car was built on what's called a VW411 platform which was originally designed way back in 2012.
Now, given that I live way down on the other end of the planet - I have never actually seen a physical NMS platform Passat - but I understand that the same design for the car persisted in America until 2019. This means that notwithstanding that your car has a 2017 build date, your car uses control modules that rely on 2012 technology! The control modules in current model VW cars use what's called UDS/ODX protocols which is the next generation technology to your Passat NMS.
On today's VW cars - when a OBD11 user selects the Central electrics module, then adaptation (channel), he/she is presented with a list of channels that have word-based descriptors. On non-UDS/ODX control modules (like your Passat), there are no word based descriptors- instead, these older modules contain a table of numbered channels.
So, on your Passat, navigating adaptation channels is much more cryptic because the OBD11 user needs to decipher what the function is for each numbered adaptation channel. I can't help with this task because I concentrate on UDS/ODX modules only. I suggest further research using Mr. Google.
Don
|
|
vwb7
New Member
nothing for the us b7 2017 passat 1.8t r-line?? or am i just that dumb?
Posts: 5
|
Post by vwb7 on Feb 18, 2021 21:27:56 GMT
Thank you so much for your time! I so greatly appreciate it.
|
|
|
|
Post by artemrus on Oct 25, 2021 21:40:52 GMT
Hello! Will there be any consequences after installing LED bulbs in fog lights? On octavia a5 FL, the keys on the BCM unit burned out. Thanks in advance for your reply.
|
|
|
|
Post by dv52 (Australia) on Oct 27, 2021 23:26:25 GMT
@artenus: Hi
Your Audi A5 is built on a MLB platform - ALL the cars in this part of the forum use MQB platform. Maybe ask your question in the A5 forum
Don
|
|
|
|
Post by artemrus on Oct 29, 2021 11:28:44 GMT
Hello! I have a Skoda octavia a7 fl. Will there be any consequences of installing LED bulbs in fog lights? Does the BCM block fail?
|
|
|
|
Post by bajwha on Mar 22, 2022 19:37:57 GMT
Hi All, sorry I am new here. I have GOLF MK7 2017. Recently I have changed headlight bulbs from halogen to LED. Head light day light high beam also fog light.
Do I have to make any changes from OBDeleven? as my light flick when ever engine start at traffic lights. Already got OBDELEVEN. please help me with this issue.
thanks
|
|
I already tried and I get no answer. thanks for replying, i will have to put my halogen bulbs again ...
