Bale
New Member
Posts: 13 
|
Post by Bale on Jul 28, 2018 9:08:05 GMT
I have tried and tested the following apps on my Karoq 2018 (1.6 TDI DSG):
• Refuel quantity in dashboard
• Mirror dip
• Gauge Test-Needle Sweep
• Comfort turn signals
• Enable fun level display when on auto
And the following coding:
• Auto lock doors without Kessy nearby:
Select Control unit B7 (Start system Interface)
Authorization: 20103
Adaptation
internal_passive_entry_exit_byte1
passive_exit_door_slam_lock
Value: Active
Does anyone else has tested other apps?
And if someone has done some adaptations/coding please share it.
Thanks
|
|
|
|
Post by Pa.Ko on Nov 23, 2018 21:04:39 GMT
I activated mirror dip using app, but I cannot get it working. I have option in infotainment checked. Yet when reversing, mirror doesn't move.
Please can you explain how you get it working?
(I found some posts on net for Octavia and Kodiaq, and tried switching mirror control switch to passenger (R in my case) position prier/while reversing etc but nothing happens.)
|
|
Bale
New Member
Posts: 13
|
Post by Bale on Dec 1, 2018 7:46:01 GMT
After you activate the App:
1. Set mirror switch to R position
2. Enable mirror dip via Car Display (Settings)
3. Put it in R gear
If it is still not working:
1. Switch ignition ON
2. Enable mirror dip via Car Display
3. Set mirror switch to R position
4. Put it in R gear
5. Manually move mirror in position that must be stored
6. Put it in P (parking) gear
7. Switch ignition OFF
8. And now try to test it, it should work
|
|
pako
New Member
Posts: 6
|
Post by pako on Dec 9, 2018 19:00:58 GMT
I tried this several times and it is not working. My Karoq is MY19 (produced in September 2018). Maybe they changed something compared to previous MY18 build? Anyone with new build have it working?
|
|
|
|
Post by Thirsty on Dec 15, 2018 21:46:14 GMT
Mirror dip won't work properly without memory.
I would only code it if you have memory otherwise it's useless in my eyes.
|
|
|
|
Post by Gianni on Dec 15, 2018 22:00:51 GMT
Exactly!
How can be sure to have rightly identified my car not having memory?
I saw live data of the door electronic passenger module, under "mirror memory" and seen that values x and y always remained at zero, even while I moved the mirror.
Is it the correct way to check?
|
|
|
|
Post by fkaroq on Jun 21, 2019 19:33:20 GMT
I did the following:
.• Auto lock doors without Kessy nearby:
Select Control unit B7 (Start system Interface)
Authorization: 20103
Adaptation
internal_passive_entry_exit_byte1
passive_exit_door_slam_lock
Value: Active
Is it possible to also automaticly fold mirrors?
|
|
|
|
Post by m3ga1800 on Jan 12, 2020 15:13:10 GMT
OPEN / CLOSE CAR - CONFERMA ACUSTICA (MENU ATTIVAZIONE / DISATTIVAZIONE)
Suono clacson quando si apre e si chiude il veicolo. Oltre ad aggiungere menu di infotainment per attivare o disattivare la funzione.
Modulo 09 - Centralino elettronico
adattamento
Segnali di risposta
In Akustische rueckmeldung generale, passa un "On"
In Akustische Rueckmeldung Signalhorn, passa un "On"
In Akustische rueckmeldung entriegeln, passa a "On" (suono all'apertura, due volte)
In Akustische rueckmeldung verriegeln, passa a "On
".
In Menuesteuerung Akustische rueckmeldung, modificare il valore su "On". (Menu Attiva in Infotainment auto / impostazioni / impostazioni di apertura e chiusura -> "Conferma acustica della chiusura centralizzata")
Confermiamo, codice 31347.
|
|
JABUIGUES@HOTMAIL.ES
Guest
|
Post by JABUIGUES@HOTMAIL.ES on Jan 23, 2020 0:39:27 GMT
I have tried and tested the following apps on my Karoq 2018 (1.6 TDI DSG): • Refuel quantity in dashboard • Mirror dip • Gauge Test-Needle Sweep • Comfort turn signals • Enable fun level display when on auto And the following coding: • Auto lock doors without Kessy nearby: Select Control unit B7 (Start system Interface) Authorization: 20103 Adaptation internal_passive_entry_exit_byte1 passive_exit_door_slam_lock Value: Active Does anyone else has tested other apps? And if someone has done some adaptations/coding please share it. Thanks |
|
cjje
New Member
Posts: 8
|
Post by cjje on Nov 26, 2020 23:02:23 GMT
I have used the new Soundaktor app, and the display fan speed on auto app on my MY21 Karoq Sportline 2.0TSI successfully. But the Pulsation of the Start button and Comfort Indicator apps fail with a 'not supported' response. (My car has KESSY.)
Chris
|
|
|
|
Post by franky68 on Jun 2, 2022 16:23:50 GMT
linkOPEN / CLOSE CAR - CONFERMA ACUSTICA (MENU ATTIVAZIONE / DISATTIVAZIONE) Suono clacson quando si apre e si chiude il veicolo. Oltre ad aggiungere menu di infotainment per attivare o disattivare la funzione. Modulo 09 - Centralino elettronico adattamento Segnali di risposta In Akustische rueckmeldung generale, passa un "On" In Akustische Rueckmeldung Signalhorn, passa un "On" In Akustische rueckmeldung entriegeln, passa a "On" (suono all'apertura, due volte) In Akustische rueckmeldung verriegeln, passa a "On ".In Menuesteuerung Akustische rueckmeldung, modificare il valore su "On". (Menu Attiva in Infotainment auto / impostazioni / impostazioni di apertura e chiusura -> "Conferma acustica della chiusura centralizzata") Confermiamo, codice 31347.
|
|
|
|
Post by sefaydn on Jul 4, 2022 11:43:08 GMT
Hello friends,
First of all, I wish everyone a healthy day.
Apps i made;
• We can lock the doors while the vehicle is running.
• We can see the amount of tank liters.
• The rear parking light works in sync with the turn signal.
• Horn warning when doors are locked
What i want to do;
• Video is not watched in our vehicle
• Front led eyebrows make usa
• Increasing ambient lighting colors
• Display variants for ghost display
|
|
|
|
Post by skodasupreme on Oct 26, 2024 16:06:53 GMT
I have tried and tested the following apps on my Karoq 2018 (1.6 TDI DSG): • Refuel quantity in dashboard • Mirror dip • Gauge Test-Needle Sweep • Comfort turn signals • Enable fun level display when on auto And the following coding: • Auto lock doors without Kessy nearby: Select Control unit B7 (Start system Interface) Authorization: 20103 Adaptation internal_passive_entry_exit_byte1 passive_exit_door_slam_lock Value: Active Does anyone else has tested other apps? And if someone has done some adaptations/coding please share it. Thanks Cant get Needle swipe to work on obd11 nor caristaapp I have virtual screen, not working. |
|
