Problem with light assist

new

« Prev
1
Next »

ngx83
New Member

Posts: 4

Problem with light assist Jul 25, 2018 12:35:16 GMT

Quote

Post by ngx83 on Jul 25, 2018 12:35:16 GMT

Hi everyone !

I need some help, i have a Golf 7 FL 1.5 TSI Highline, with led directionnal headlights.

I don't have the Dynamic Light Assist, cause i don't bought the car with the "hight" camera A5, but i should have the basic light assist.

I followed all the steps to do it, but now, i'm stuck. I have the error with the "AFS" on the dashboard, according to the differents tutorials, i need to do a "basic settings" of the headlight

(for now, i have the light assist option, but it doesent works, i have the following error in the 4B multifonction module " headlights : no basic settings")

Finally, when i try to perform a basic settings, i followed this steps :

Basic settings-> "Basic headlamp setting", then Basic settings "Acknowledge basic setting".

But, the basic settings never start, the status is stuck to "not running", i don't no why, maybe it's a bug with obdeleven ?

Can you help me ? I'm so close...

Thank you.

Carolco Senior Member Posts: 435	Problem with light assist Jul 25, 2018 15:23:44 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by Carolco on Jul 25, 2018 15:23:44 GMT Hello. put the codification for your light assist. i understand you have básic Leds greetings

ngx83
New Member

Posts: 4

Problem with light assist Jul 25, 2018 15:36:17 GMT

Quote

Post by ngx83 on Jul 25, 2018 15:36:17 GMT

Hello,

Here are the following steps i did:

(09) Central Electrics , adaptations, Fernilchat_ assistent

Menuesteuerung Fernlichtassistent not present, change to present

Erweiterte_Fernlichtsteuerung -> AFS, Fernilcht ueber AFS change to AFS, FLA, Fernlicht ueber AFS

(4B) Multifunction Module

Long coding

Byte 2 - tick bit 0 and bit 1.

That's it.

Thanks a lot.

newty
Moderator

Grumpy German know it all

Posts: 841

Problem with light assist Jul 26, 2018 6:02:57 GMT

Quote

Post by newty on Jul 26, 2018 6:02:57 GMT

Sorry to ask this provocantly, but how do you come to the conclusion that Light Assist will work on that car?
We are having two control modules in the Golf which are able to switch headlights automatically to highbeam:
One is the A5 camera which is equipped with DLA, HCA or TSR. If nothing from this list, no camera.

The other one is the photodiode in the rear mirrors fixture (Quite to this one www.motor-talk.de/bilder/-light-assist-nachruesten-moeglich-wenn-ja-wie-g21299024/fernlichtassi-i203435177.html) - which is only equipped with HBA but no Lane Assist and no TSR. Also, this one is not capable of managing DLA.

If none of these two modules are installed there is no way of enabling HBA, sorry.

Please be so kind to set your app's language to English when posting screenshots and before trying out coding suggestions.
This will help everbody to understand and advise.

ngx83
New Member

Posts: 4

Problem with light assist Jul 26, 2018 7:39:11 GMT

Quote

Post by ngx83 on Jul 26, 2018 7:39:11 GMT

No problem !

I have the second camera ( photo sensor ) with rain sensor, i don't have DLA and lane assist.

So i should have the Light Assist !

Im stuck with the coding inside the 4B Multifunctions unit, i followed this tutorial :

www.ascoding.ch/en/light-assist-high-beam-assist/

But i think i did a mistake , cause i can't do a "basic settings" for the headlight to delete the fault code, i have the "Light assist" option now, but it doesn't work at all.

newty
Moderator

Grumpy German know it all

Posts: 841

Problem with light assist Jul 26, 2018 9:46:13 GMT

Quote

Post by newty on Jul 26, 2018 9:46:13 GMT

The rain light sensor is an entire diffent component, not capable of managing any high beam

From my information, you should find a controller at adress 20 in OBD11, which is the camera lookalike in the mirror. It is not directly connected to the windshield like the rain sensor or the A5 camera.
I have not found any complete coding guide for the HBA without the A5 camera.

Please be so kind to set your app's language to English when posting screenshots and before trying out coding suggestions.
This will help everbody to understand and advise.

ngx83 New Member Posts: 4	Problem with light assist Jul 26, 2018 10:09:56 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by ngx83 on Jul 26, 2018 10:09:56 GMT So, did you find any informations about coding 4B module ?

alltrack18 Junior Member Posts: 54	Problem with light assist Jul 26, 2018 10:38:29 GMT via Tapatalk Quote Select Post Deselect Post Link to Post Back to Top Post by alltrack18 on Jul 26, 2018 10:38:29 GMT Check this solution modyfikacje-vw.blogspot.com/2017/12/high-beam-assist.html?m=1

Carolco Senior Member Posts: 435	Problem with light assist Jul 26, 2018 12:03:12 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by Carolco on Jul 26, 2018 12:03:12 GMT Hello. you need a frontal camera ever. Without a camera the car can not opérate light assist.

Shoutbox

Please don't use the shoutbox for complex questions! For those questions please create a thread in the right subforum.

ivankoterlyn: Seat Alhambra2015 I tried to unlock Full Link with one click. But the program did not unlock, but the money was withdrawn Nov 11, 2024 18:54:25 GMT

whataboutthis: ivankoterlyn you need to talk to support and get a refund if it took money but did not work. Nov 12, 2024 15:28:34 GMT

georgegianna: Recover Your Lost Coins with Paradox Recovery Wizard

I just wanted to express my heartfelt gratitude for your incredible help in recovering my lost funds. Your expertise and dedication have truly made a difference, and I’m so thankful for the support you’ Nov 15, 2024 19:31:32 GMT

derpandabear: Hi everyone, it's been two weeks since I've posted my question. I would greatly appreciate it if anyone can respond to my thread: forum.obdeleven.com/thread/28144/summertime-setting-mk8-golf-gti. Thanks and Best Regards! Nov 16, 2024 19:49:09 GMT

bmwg30lci: sveiki,noreciau gauti daugiau informacijos apie jusu produkcijos paskirti.ar imanoma pakeisti salone migtuku spalvas?pvz; pas bmw g30 lci tamsoje sviecia oranzine spalva o diena balta.as noreciau,kad visuomet butu tik baltas mygtuku pasvietimas. Nov 18, 2024 8:02:36 GMT

whataboutthis: @bmwg201ci jums reikia patikrinti vieno paspaudimo programas, skirtas jūsų varikliui, jei to, ko norite, ten nėra, pateikite užklausą BMW oca temoje. Nov 18, 2024 9:13:28 GMT

dado: GOLF 6 MATCH - include scandinavian DRL lights? does anyone know Nov 18, 2024 10:02:35 GMT

med44: brkica SIL VOUS PLAIT J'AI INSTALER UNE CAMERA SUR UNE GOLF 8 ;ET Jai besoin du fichier 5WA980556B. Nov 19, 2024 0:35:46 GMT

lazar: How do i change app country? bmw features not available Nov 19, 2024 19:18:39 GMT

Deleted: BIuS Nov 20, 2024 1:55:57 GMT

kp55: Hi, Nov 20, 2024 15:29:05 GMT

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

le4dsoldier: hı Nov 20, 2024 18:39:26 GMT

le4dsoldier: ı need some help, if ı'll buy a normal obdeleven. may ı use longcoding and can ı remove sfd lock Nov 20, 2024 18:40:54 GMT

fliew: Hi All, can anyone help me to reset my 2014 Audi S3 A/C to factory setting with OBD11, thanks. Nov 21, 2024 0:38:03 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

bumble: Does "Confirmation of installation change" in 5F need a Pro or Ultimate license? Nov 21, 2024 10:09:51 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

whataboutthis: fliew you need to share more info, car year have you coded in obd11 or vcds etc there is no magic button to revert to factory setting you have to undo all your changes manually in Adaptions and Long Coding you can copy/paste if you have backup Nov 21, 2024 16:54:18 GMT