|
Post by alltrack18 on Jul 14, 2018 17:17:22 GMT
Maybe somebody make this before and can help me. I have led-top front lights, light and rain sensors, discovery media navigation but dont have front multifunction camera in front windshield. I thinking to instal rear mirror with camera 3g0857511ag instead my fotohrom without camera. 1. I will need to fit some aditional wires? 2. Can i code dynamic light assist, lane assist and road signs recognition from obdeleven after retrofit? 3. That new mirror will fit for my car? Thanks in adwance
|
|
|
Post by newty on Jul 19, 2018 9:46:13 GMT
1) yes 2) This "camera" (its a photosensor, not having any image processing capabilities) is used for LA (nothing dynamic, just all high beams on or off) only, not capable of providing sensoric data for Dynamic LA, Lane Assist or Traffic Sign Recognition. The camera needed for this is much bigger, has a triangle shaped housing and is sitting directly on the windscreen. Search 3Q0 980 654 for examples 3) This one: Yes. The camera needed for DLA, LA and TSR will not fit - you will need a different windshield and some other plastic covers for the roof.
|
|
|
Post by alltrack18 on Jul 19, 2018 16:59:21 GMT
Thanks for the exhausting answer, so if i instal that mirror with such „camera” i will able to lounch high beam assist only? Maybe you know if the plug will match each other? Aditional wire is requaied?
|
|
|
Post by newty on Jul 20, 2018 8:04:05 GMT
Exactly. High Beam Assist only. I have no expirience in this, as I find the performance of this hardware extremely poor and unreliable.
Additional hardware and wiring is needed: *Can extended to mirror foot *Gateway type high is needed *Light switch with "auto" setting is needed *Light sensor in front screen needed
|
|