|
|
Post by britscoot on Jun 30, 2018 15:54:20 GMT
Hi
both my passenger windows stopped working at the same time.Power locks,mirror and door lights are all ok.As is the battery.
Checked fuses and all is good.Just wanted to know what i should look at next.
Here is the reading and thanks in advance :-)
62 Door Electronics Rear Left
System description: TSG HL
Software number: 8K0959795
Software version: 0170
Hardware number: 8K0959795
Hardware version: H06
Serial number: 0000006728259
Long coding: 010C02204001210001
Trouble codes:
00446 - Function limitation due to insufficient voltage
static
00532 - Supply voltage Lower limit not reached
static
|
|
|
|
Post by Thirsty on Jun 30, 2018 16:29:45 GMT
There is a problem with your voltage.
You can check your battery and all wires(to your doors).
|
|
|
|
Post by britscoot on Jun 30, 2018 16:45:16 GMT
Thank you for your reply Thirsty.
I have checked my battery and wires but still have the problem.
Could the door module be bad?
|
|
|
|
Post by Thirsty on Jun 30, 2018 17:02:23 GMT
It's strange that both windows stop working at the same time and due to the fault codes i wouldn't replace the ECUs.
Every door has it's own ECU that's a second reason why i would say that it's not the ECU.
|
|
|
|
Post by britscoot on Jun 30, 2018 17:36:26 GMT
Yes it is strange that both stopped at the same time.
Will do another scan of the other modules.
I was wondering if there is relay maybe?
|
|
|
|
Post by Thirsty on Jun 30, 2018 17:54:41 GMT
I'm sorry i can only assist you with coding related stuff. I don't know the electrics of all cars  |
|
|
|
Post by britscoot on Jun 30, 2018 18:11:12 GMT
I reall appreciate your reply Thirsty.  I will do a full scan and post results here. Thanks again |
|
|
|
Post by britscoot on Jul 1, 2018 12:01:07 GMT
Hi
is it possible to turn off the function limitation?
|
|
|
|
Post by Thirsty on Jul 1, 2018 15:37:23 GMT
Hi is it possible to turn off the function limitation? What exactly do you mean? |
|
|
|
Post by britscoot on Jul 1, 2018 15:48:56 GMT
Hey Thirsty i was wondering if the module could be re programed to normal. Or will it sort its self out?  |
|
|
|
Post by Thirsty on Jul 1, 2018 17:21:59 GMT
Hey Thirsty i was wondering if the module could be re programed to normal. Or will it sort its self out? What do you mean with reprogramming the module? I thought it stopped working without external influence or do you mean "resetting" it to stock? |
|
|
|
Post by britscoot on Jul 1, 2018 18:08:50 GMT
I thought the door module had put its self in to limited function and stopped the windows from working. Just thought it could be reset? Thanks again Thirsty |
|
|
|
Post by Thirsty on Jul 1, 2018 19:24:39 GMT
I don't know if there's an reset option in app but if you have coded anything in these ECUs you can try to roll back to your backup(i hope you made one ) If you haven't changed/coded anything i don't think this will help but it's worth a try. Another idea would be to change the ECUs from front and back of each side BUT i'm not sure if this'll work :/ |
|
