Daylight Running Lights On/Off

new

« Prev
1
Next »

joab007
New Member

Posts: 8

Daylight Running Lights On/Off Jun 24, 2018 19:18:13 GMT whassupman likes this

Quote

Post by joab007 on Jun 24, 2018 19:18:13 GMT

DRL (Daylight Running Lights) On/Off option in MMI
Description: For A4 (B9) cars you are unable to turn the DRL’s on or off in the MMI. This coding enables this option in the MMI.
Notes: Tested with Matrix headlights but same coding applies to non-Matrix headlights.
Usage: Once configured, go into MMI and go to Car / Vehicle Settings / Exterior Lighting. A new option will appear to turn the DRL’s on or off.
Software: VCDS Version: 17.1.3.0 (x64) HEX-V2
Coding:
1. Module 09 (Central Electrics)
2. Coding
3. Long Coding
4. Long Coding Helper
5. Byte 2 (Third from left)
6. Tick/Select “Bit 1”
7. Exit
8. Do It

How to do this with obdeleven or is it the same.

Byte 02
Bit 0 - 2 Lighting
Bit 3 - High traction drop downs (HTDD)
Bit 4 - Automatic transmission installed
Bit 5 - 7 no description

Read more: forum.obdeleven.com/thread/3262/control-unit-setup#ixzz5JNBcv7SJ

Is this byte 2 in modul 09 If it is should i change this to "Bit 1"

Last Edit: Jun 24, 2018 19:35:07 GMT by joab007

Deleted
Deleted Member

Posts: 0

Daylight Running Lights On/Off Jun 24, 2018 20:12:57 GMT

Quote

Post by Deleted on Jun 24, 2018 20:12:57 GMT

joab007 the link you have at the bottom it to my Seat Leon control unit. I am not sure if they are the same setup.

However the VCDS Coding you have above

1. Module 09 (Central Electrics)
2. Coding
3. Long Coding
4. Long Coding Helper
5. Byte 2 (Third from left)
6. Tick/Select “Bit 1”
7. Exit
8. Do It

Is converted as follows: (provided you have the same setup as mine)

Select Control unit 09

Select Long Coding

Select the 1 at the top of the screen (this is where you may have a 01)

Select Byte 2 If you are not sure how to do that then when you open long coding you will be on Byte 0 at the bottom of the screen is a forward and backward

arrows, just select the right hand arrow until you see Byte 2 (bottom left of the white screen at the top)

Select Bit 1 (if the Bit's have labels then it will be the second one down) and tick the box.

Then save with green tick box

Exit and go check it its there.

Last Edit: Jun 24, 2018 20:13:27 GMT by Deleted

joab007 New Member Posts: 8	Daylight Running Lights On/Off Jun 28, 2018 16:19:19 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by joab007 on Jun 28, 2018 16:19:19 GMT Ok i done the changes today and it worked. But the text on the MMI was instead of DRL i got lowbeam.
	Last Edit: Jun 28, 2018 18:01:04 GMT by joab007

kcurpen New Member Posts: 29	Daylight Running Lights On/Off May 29, 2019 6:52:04 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by kcurpen on May 29, 2019 6:52:04 GMT Hi Mate What VCDS interface did you use, is it the HEX+CAN or the HEX-V2, I need to add the DRL Menu to my MMI as well on my A4 B9

Deleted Deleted Member Posts: 0	Daylight Running Lights On/Off Jan 6, 2020 17:02:51 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by Deleted on Jan 6, 2020 17:02:51 GMT tried doing this on my car, when i select the bit it just says something like no description for this data. after that do you go back and the option should be there in select from the previous menu?

Shoutbox

Please don't use the shoutbox for complex questions! For those questions please create a thread in the right subforum.

ivankoterlyn: Seat Alhambra2015 I tried to unlock Full Link with one click. But the program did not unlock, but the money was withdrawn Nov 11, 2024 18:54:25 GMT

whataboutthis: ivankoterlyn you need to talk to support and get a refund if it took money but did not work. Nov 12, 2024 15:28:34 GMT

georgegianna: Recover Your Lost Coins with Paradox Recovery Wizard

I just wanted to express my heartfelt gratitude for your incredible help in recovering my lost funds. Your expertise and dedication have truly made a difference, and I’m so thankful for the support you’ Nov 15, 2024 19:31:32 GMT

derpandabear: Hi everyone, it's been two weeks since I've posted my question. I would greatly appreciate it if anyone can respond to my thread: forum.obdeleven.com/thread/28144/summertime-setting-mk8-golf-gti. Thanks and Best Regards! Nov 16, 2024 19:49:09 GMT

bmwg30lci: sveiki,noreciau gauti daugiau informacijos apie jusu produkcijos paskirti.ar imanoma pakeisti salone migtuku spalvas?pvz; pas bmw g30 lci tamsoje sviecia oranzine spalva o diena balta.as noreciau,kad visuomet butu tik baltas mygtuku pasvietimas. Nov 18, 2024 8:02:36 GMT

whataboutthis: @bmwg201ci jums reikia patikrinti vieno paspaudimo programas, skirtas jūsų varikliui, jei to, ko norite, ten nėra, pateikite užklausą BMW oca temoje. Nov 18, 2024 9:13:28 GMT

dado: GOLF 6 MATCH - include scandinavian DRL lights? does anyone know Nov 18, 2024 10:02:35 GMT

med44: brkica SIL VOUS PLAIT J'AI INSTALER UNE CAMERA SUR UNE GOLF 8 ;ET Jai besoin du fichier 5WA980556B. Nov 19, 2024 0:35:46 GMT

lazar: How do i change app country? bmw features not available Nov 19, 2024 19:18:39 GMT

Deleted: BIuS Nov 20, 2024 1:55:57 GMT

kp55: Hi, Nov 20, 2024 15:29:05 GMT

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

le4dsoldier: hı Nov 20, 2024 18:39:26 GMT

le4dsoldier: ı need some help, if ı'll buy a normal obdeleven. may ı use longcoding and can ı remove sfd lock Nov 20, 2024 18:40:54 GMT

fliew: Hi All, can anyone help me to reset my 2014 Audi S3 A/C to factory setting with OBD11, thanks. Nov 21, 2024 0:38:03 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

bumble: Does "Confirmation of installation change" in 5F need a Pro or Ultimate license? Nov 21, 2024 10:09:51 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

whataboutthis: fliew you need to share more info, car year have you coded in obd11 or vcds etc there is no magic button to revert to factory setting you have to undo all your changes manually in Adaptions and Long Coding you can copy/paste if you have backup Nov 21, 2024 16:54:18 GMT

Daylight Running Lights On/Off

Post by joab007 on Jun 24, 2018 19:18:13 GMT

Post by Deleted on Jun 24, 2018 20:12:57 GMT

Post by joab007 on Jun 28, 2018 16:19:19 GMT

Post by kcurpen on May 29, 2019 6:52:04 GMT

Post by Deleted on Jan 6, 2020 17:02:51 GMT

Shoutbox