bob77
New Member
Posts: 6
|
Post by bob77 on Jun 23, 2018 21:56:39 GMT
Hi everyone,
Has anybody tried to have there drl stay on while indicating?
i’ve tried this
Select Control unit 09 (Central Electrics)
Security access
Access Code 31347
Adaptation
(12)-Leuchte2SL VLB10-Lichtfunction E2
Select: not active
(12)-Leuchte3SL VRB21-Lichtfunction E3
Select: not active
Doesn’t seem to work but i’ve noticed there is a a lot of things that seem to be different on my golf r 7.5
I’m not sure if it’s because it’s built this year .
any help is appreciated
|
|
|
|
Post by lovic87 on Jun 26, 2018 11:45:44 GMT
Tried, yes, plenty. Succeeded, not at all. From what I understand, our DRL/signaling functions are hardwired into the lighting themselves. I may not be correct exactly but it's something along those lines, which is why we're unable to program it via OBD11/VCDS
|
|
|
|
Post by dv52 (Australia) on Jun 27, 2018 7:25:25 GMT
bob: My understanding is that the FL mk7 had a fundamental re-design in its headlight function: In the earlier model mk7, the headlights were controlled by the Central Elect module @ address hex09 and Leuchte-sets were used to program the lighting function. However, the FL mk7 introduced 2 x new modules called "Light Control Modules" (LCMs) - left-side LCM is @ address hexD6 and right-side LCM is @ address hex D7.
This means that the traditional Leuchte-set for the lamps in the headlight assemblies are deactivated by the factory in the FL mk7. Which means unfortunately that your changes to the leuchte-channels will have no effect (alas)
Don
|
|
bob77
New Member
Posts: 6
|
Post by bob77 on Jul 3, 2018 20:46:12 GMT
bob: My understanding is that the FL mk7 had a fundamental re-design in its headlight function: In the earlier model mk7, the headlights were controlled by the Central Elect module @ address hex09 and Leuchte-sets were used to program the lighting function. However, the FL mk7 introduced 2 x new modules called "Light Control Modules" (LCMs) - left-side LCM is @ address hexD6 and right-side LCM is @ address hex D7. This means that the traditional Leuchte-set for the lamps in the headlight assemblies are deactivated by the factory in the FL mk7. Which means unfortunately that your changes to the leuchte-channels will have no effect (alas) Don Thanks Don, much appreciated as i couldn’t figure it out. Any idea on what i could do? Do i change what you mentioned above? Rob |
|
|
|
Post by dv52 (Australia) on Jul 4, 2018 10:36:12 GMT
bob: alas, I don't believe that there is much that can be done to the LCMs. Why not try to investigate the module's adaptation channels - if OBD11 can read the database?
Don
|
|
