crmb
New Member
Posts: 2
|
Post by crmb on Jun 7, 2018 12:00:12 GMT
Hello all together,
I changed the setting of the hill hold control from normal to early.
Then I saved this setting. This change was accepted, but just in this moment in the Display of the dashboard was the warning that the maneuvering-brake function is inactivated.
I looked in the park assist (I think it was no. 79), and there is the maneuvering-brake function active.
Also in the settings in the navigation-system is the maneuvering-brake function active.
But when I drive backwards to an object, the maneuvering-brake function does nothing. Before the maneuvering-brake function braked automatically (even very firm!).
What can I do with OBDeleven to solve this problem?
|
|
crmb
New Member
Posts: 2
|
Post by crmb on Jun 8, 2018 4:40:51 GMT
Yesterday I tested the maneuvering-brake function again with a carton.
Now I know that the maneuvering-brake function works, but I think it works not so aggressive as it worked before.
It's possible that the reaction of the maneuvering-brake function changed with changing the setting of the hill hold control?
It's possible to change the setting of the reaction of the maneuvering-brake function without changing the setting of the hill hold control?
Or do I an operating error when I test the maneuvering-brake function?
|
|