bausi
New Member
Posts: 12
|
Post by bausi on Jun 1, 2018 7:10:48 GMT
Yesterday i played around in the "Multifunktionsmodul" and activated the rain light. After confirming, the AID said that the cornering light is "not working" and the Dynamic light assist is also out of order. The Error message in the control uiint just says: no basic parameters.
Any ideas? I'm a bit afraid taking my car to the dealer, because it is prety obvious that somebody messed around with the control unit....
Car: e-Golf with DLA and full LED ligths
|
|
|
|
Post by Thirsty on Jun 1, 2018 7:13:40 GMT
First of all have you tried to undo your coding?
|
|
bausi
New Member
Posts: 12
|
Post by bausi on Jun 1, 2018 10:16:41 GMT
yes, i tried to deactivate the "rain_lights" but the error doesn't go away. Still the same error: "Lights - No basic parameters"
My guess is that, due to activating the rain lights, the CU lost the parameters for the lights. When i turn on the car, the lights move up and down, but not left and right for self adjustment.
|
|
|
|
Post by Thirsty on Jun 1, 2018 10:41:24 GMT
Ok then i guess you'll have to set the parameters again but i don't know how to do that.
Btw what is dla?
|
|
|
|
Post by vwjap on Jun 1, 2018 11:19:44 GMT
Dynamic light assist,
It does auto high beams and puts shutters in to stop blinding people in front or coming the other way
I know when people play with lights they have to re set them up again by going into basic settings or the likes
|
|
bausi
New Member
Posts: 12
|
Post by bausi on Jun 1, 2018 11:19:54 GMT
dla - Dynamic Light Assist
|
|
|
|
Post by vwjap on Jun 1, 2018 11:24:57 GMT
I think the basic settings is in 4b
|
|
bausi
New Member
Posts: 12
|
Post by bausi on Jun 1, 2018 19:26:38 GMT
could you go in detail with that? what do you mean by 4b? and do you have any idea, what to add in there?
|
|
|
|
Post by vwjap on Jun 1, 2018 19:51:55 GMT
Go into module 4b multifunction module
Then I think you go to basic settings
But I’ve never done it so can’t talk you through it
|
|
|
|
Post by vwjap on Jun 1, 2018 21:11:51 GMT
Found this on the mk7 page
Anytime you change something in the headlight you have to "reset" the lights. To do this park the car on a flat surface. Go to module 55(headlamp regulation). ->Basic settings-> "Basic headlamp setting", then Basic settings "Acknowledge basic setting".
This should fix the error
But on the 7.5 it’s not in module 55 it’s in 4B like I said earlier
|
|
bausi
New Member
Posts: 12
|
Post by bausi on Jun 2, 2018 20:29:25 GMT
I did this and it fixed the problem for me - thx
|
|
|
|
Post by vwjap on Jun 3, 2018 6:52:37 GMT
Cool, glad you got it sorted
|
|
|
|
Post by newty on Jun 4, 2018 8:37:33 GMT
Please note that basic headlight settings should be performed on an even surface -otherwise your dynamic height regulation will be off.
|
|
