jim45
New Member
Posts: 24
|
Post by jim45 on May 23, 2018 11:36:04 GMT
Every time I connect to OBD11, I get a fault in module 19, which is static current - too high. There is no history as no modifications have been carried out in this module.
It clears without problem but returns on reconnection.
|
|
|
Post by Thirsty on May 23, 2018 11:53:16 GMT
Could you please tell us the exact fault name/number?
|
|
jim45
New Member
Posts: 24
|
Post by jim45 on May 23, 2018 12:58:46 GMT
Well I would but.........went out to the car to scan and the fault has not come back after the last clearance.
|
|
|
Post by Thirsty on May 23, 2018 13:04:48 GMT
Then it's gonna be impossible for me to help you find the cause :/ If the fault comes back take a screenshot of it or note it down before you clear it again. Once noted or screenshotted post it here.
|
|
|
Post by miltiadis on Sept 19, 2018 3:18:42 GMT
I recently noticed similar error when I scan my vehicle (Leon 5d 2018 1.8TSI) Everything is working excellent. Battery status is normally charged. I keep having this intermittent fault static current too high. U140600
|
|
|
Post by htcupra on Sept 22, 2018 8:48:56 GMT
I have the exact same fault message stating "static current too high" almost every time I did a scan.
|
|
|
Post by maypack on Sept 22, 2018 15:27:37 GMT
Exact same thing from me as well.
|
|
|
Post by miltiadis on Sept 24, 2018 9:30:27 GMT
When I started to use obdeleven, didn't get this fault. It has started to appear the last two months and after a few obdeleven software updates...
... so what is wrong? do we all have electronic problems in our cars?
In the other hand though, this type of fault seems to affect infotainment system, maybe a firmware update is needed in our infotainment system.
All of you having this type of fault, what type of infotainment system do you have fitted in your car?
I have media system plus 8" + mirrorlink
|
|
ttt
New Member
Posts: 12
|
Post by ttt on Oct 10, 2018 17:40:06 GMT
This is fault means - Leaking Current detected, and battery can discharge faster. It is necessary to search a problem. Usually installed additional equipment is not able to pass into standby mode.
|
|