|
Post by basedmike30 on May 22, 2018 8:35:44 GMT
I have a non lighting package golf and got a pair of helix headlights. I have morimoto HIDs installed and whenever my low beams turn on I get a driver side and passenger side low beam error, however the lights still work. Also when I try to leave the high beams on the low beams will flicker. Is there anyway I can code this out? What else could be causing this?
Thanks
|
|
|
Post by dv52 (Australia) on May 23, 2018 5:04:43 GMT
mike:Not sure how the retrofit to HIDs was done in your case (is this legal in your part of the world without installing leveling equipment?), but you could try as follows:
For the low beam error message - the 2 x Leuchte-sets for the Low beam are Leuchte6ABL LC5 (left-side) and Leuchte7ABL RB1 (Right side). Because you have not said otherwise, I assume that these Leucthe-sets have not been altered. If so, then the Lasttyp channel setting on both Leuchte-sets will be 11- Abblendlicht, which is standard for incandescent lamps. Try changing these to 3 Xenon Abblendlicht on both Leuchte-sets
Don
|
|