|
Post by aliti19 on May 18, 2018 13:12:53 GMT
Hey guys, I recently installed the mirror dip function, however the mirror does not tilt back up after driving off. Any suggestions? 2016 GTI.
|
|
|
Post by svdsinner on May 18, 2018 13:47:05 GMT
I know this sounds ridiculous, but it is what got my mirror dip function ('06 Audi A6) working: Unplug/clean/reconnect the electrical connectors inside the door jambs on both the drivers door and the passenger door. For me, it was the drivers side door connector that once I cleaned it, the mirror dip started working. You will need to pull back the boot on the wiring harness and on my car the connector was on the A-pillar.
No idea why the drivers side door wiring impacts the mirror dip functionality that is handled by the passenger side door controller, but it is what made mine work. I was just lucky that I had to replace the window switches in the driver's door, which caused me to discover this.
|
|