jim45
New Member
Posts: 24
|
Post by jim45 on May 17, 2018 20:56:04 GMT
Just had my new FR delivered Monday and managed to get my OBD11 up & working and made a few changes such as one touch mirrors, progressive indicators, enabling Park Pilot. Unfortunately I now have a fault code which wasn’t present before I started. Here is the information from the App, can anyone pinpoint this for me please?
The fault will not clear
17 Dash Board
System description: KOMBI Software number: 5F0920950E Software version: 0310 Hardware number: 5F0920950E Hardware version: 303 ODX name: EV_DashBoardVDDMQBAB ODX version: 009060 Long coding: 27A402882A80060001887A011000000080000000
Trouble codes: U101400 - Control module incorrectly coded static Date: 2018-05-17 20:51:24 Mileage: 379 km Priority: 2 Malfunction frequency counter: 3 Unlearning counter: 14
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 17, 2018 21:18:00 GMT
check out forum.obdeleven.com/thread/1783/fix-error-codes i put in some details of common error codes. Check your history file I suspect you have added in a feature your car does not currently have the correct hardware to support. If you are not sure just post your history file and i will have a look
|
|
jim45
New Member
Posts: 24
|
Post by jim45 on May 17, 2018 22:15:53 GMT
Thanks very useful, I’ll check the history tomorrow
|
|
jim45
New Member
Posts: 24
|
Post by jim45 on May 18, 2018 9:35:50 GMT
This is my Control unit 17 History Log, I think I need the long coding in bold restored but haven’t got a clue how to do it, not even sure what I was supposed to be changing, yes I know I’m a chump but got carried away a bit like a kid with a new toy!
The tyre monitoring entry was also a bad mistake as I had to revert back because the warning light on the dash was on all the time.
OBDeleven vehicle history log
Date: 2018-05-18 09:08
VIN: VSSZZZ5FZJR123009 Car: Seat Leon FR Year: 2018 Body type: Hatchback Engine: CZEA 110 kW (150 HP) 1.4 l Mileage: 379 KM
--------------------------------------------------------------- Long coding Control unit: 17 Dash Board Old value: 27A402882A80060001887A011000000080000000 New value: 27A402082A80060001887A011000000080000000 Mileage: 379 km Date: 2018-05-18 08:24
--------------------------------------------------------------- Long coding Control unit: 17 Dash Board Values: Tire Pressure Monitoring: Old value: Yes New value: No Mileage: 379 km Date: 2018-05-17 20:50
--------------------------------------------------------------- Long coding Control unit: 17 Dash Board Old value: 27A402882B80060001887A011000000080000000 New value: 27A402882A80060001887A011000000080000000 Mileage: 379 km Date: 2018-05-17 20:33
--------------------------------------------------------------- Long coding Control unit: 17 Dash Board Values: Tire pressure monitoring display: Old value: Yes New value: No Mileage: 379 km Date: 2018-05-17 20:28
--------------------------------------------------------------- Adaptation Control unit: 17 Dash Board Name: Speed warning Values: Old value: not active New value: active Mileage: 379 km Date: 2018-05-17 20:25
--------------------------------------------------------------- Long coding Control unit: 17 Dash Board Old value: 27A402082B80060001886A011000000080000000 New value: 27A402882B80060001887A011000000080000000 Mileage: 379 km Date: 2018-05-17 20:22
--------------------------------------------------------------- Long coding Control unit: 17 Dash Board Values: Tire Pressure Monitoring: Old value: No New value: Yes Mileage: 316 km Date: 2018-05-17 17:54
--------------------------------------------------------------- Long coding Control unit: 17 Dash Board Values: Volume to be replenished: Old value: No New value: Yes Mileage: 316 km Date: 2018-05-17 17:43
--------------------------------------------------------------- Adaptation Control unit: 17 Dash Board Name: Speed warning Values: Speed: Old value: 0 New value: 77 Mileage: 304 km Date: 2018-05-17 11:27
|
|
|
Post by krystian660 on May 18, 2018 9:43:25 GMT
Go to STG 17 Coding Byte 4 - change to hex 2B Byte 10 - change to hex 6A
|
|
|
Post by seeemo on May 18, 2018 9:59:05 GMT
Go to STG 17 Coding Byte 4 - change to hex 2B Byte 10 - change to hex 6A What does that do exactly?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 18, 2018 9:59:08 GMT
|
|
jim45
New Member
Posts: 24
|
Post by jim45 on May 18, 2018 10:10:22 GMT
Much appreciated guys, I’ll report back later.
|
|
jim45
New Member
Posts: 24
|
Post by jim45 on May 18, 2018 16:03:11 GMT
Go to STG 17 Coding Byte 4 - change to hex 2B Byte 10 - change to hex 6A Did as you suggested, quick scan showed faulty control unit 17 but this time I was able to clear the fault, can’t thank you enough. I am learning but at my age it takes a little longer😀 The help I have found on this forum and seatcupra forum today has been epic.
|
|
|
Post by krystian660 on May 18, 2018 16:35:19 GMT
Nice!
|
|
|
Post by vij672 on Feb 28, 2020 21:25:59 GMT
Go to STG 17 Coding Byte 4 - change to hex 2B Byte 10 - change to hex 6A What does that do exactly? Will this work with an Audi S3 ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 28, 2020 22:57:11 GMT
all krystian660 was doing was resetting the long coding back to how it was at the start.
|
|