sami
New Member
Posts: 16
|
Post by sami on May 2, 2018 20:27:29 GMT
Hello,
I've been with the obdeleven today activating things in the car.
I was almost two hours with the ignition on, after finishing and leaving everything as I was, since some things that were activated did not work and I only let the CH / LH, the lap counter and the needle sweep activated.
I went for a spin to make the purchase and such and I realized that I do not work the Star / Stop, I get a message like that the power consumption is high and did not get to turn off the car with the Star / Stop activated in no time
I happen to someone? Could it be that I've had a lot of contact and put something on the battery? although the voltage was about 13V.
Tomorrow I'll see if it works again but it scares me a little.
Greetings and thank you
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 2, 2018 21:29:12 GMT
sami, if you are still having issues please post your history file so we can see if you accidentally changed something in error
|
|
sami
New Member
Posts: 16
|
Post by sami on May 3, 2018 6:43:05 GMT
Lo siento, OK está trabajando de nuevo. Hoy por la mañana funcionó correctamente, debe haber sido por la batería. La historia lo comprueba y todo estaba bien.
¡¡¡Muchas gracias!!!
|
|
sami
New Member
Posts: 16
|
Post by sami on May 3, 2018 6:43:37 GMT
Sorry, OK is working again. Today in the morning it worked correctly, it must have been because of the battery. The history check it and it was all ok.
Thank you very much!!!
|
|