frankm
Junior Member
Posts: 52
|
Post by frankm on Apr 23, 2018 0:41:58 GMT
For all those that asked and didn't get a response or couldn't find the sequence by doing a search, here it is. I present this with all due respect to the great minds (DV52) that provide us all with so much help but just don't have the time to hold everyone's hand.
This is the halogen coding for the Four (Five) Lamp Brake Lights. This sequence only illuminates the outer lamp when using the turn signals. So.... turn signal - outer lamp only, brake - all five lamps are on
1. Central Electronics 2. Magic number 31347 when you are asked for it 3. Adaptations 4. Left Side Inner:
1. Change Leuchte23SL HLC10 - Lichtfunktion C23 from Nicht Aktiv (Not Active) to Bremslicht (Brake Light) Save this before moving on - click the green check mark. This is where it will ask for the magic number
2. Change Leuchte23SL HCL10 - Dimmwert CD23 from 0 to 100% Save as above 5. Right Side Inner:
1. Change Leuchte 24SL HRA65 - Lichtfunktion C24 from Nicht Aktiv (Not Active) to Bremslicht (Brake Light) Save this before moving on - click the green check mark and give the magic number when asked as before.
2. Change Leuchte 24SL HRA65 - Dimmwert CD24 from 0 to 100% Save as above
Hope this helps someone. Frank
|
|
|
Post by jadams871 on Apr 28, 2018 1:36:50 GMT
Ok. I’ve asked this, and I searched and can’t find the answer. I did the 4 brake light mod, I also swapped my taillights to Deautokey LED’s and now there isn’t much difference between the tails and the brake lights. How can I make the brake lights brighter? From what I did, it only makes the outer lights brighter. How can I do both?
|
|
frankm
Junior Member
Posts: 52
|
Post by frankm on Apr 28, 2018 19:51:45 GMT
|
|
|
Post by sandjam on Aug 15, 2018 22:18:09 GMT
This does not work.. Did you actually do this on MK 7.5 with factory LED tails? or just assuming?
We want both Inner and Outer to blink with signal and also brake lights inner and outer.
|
|