|
Post by valdimar on Apr 1, 2018 16:52:24 GMT
Hello. I have recently been a OBDeleven PRO interface user, so far I do not regret the money I spent, it works as I expected and I read everything is OK.
I have only one question that concerns the lack of possibility to enter the "Steering angle sensor" tab which is displayed in yellow with the menu.
I used the Help tab where quickly (Brawooo!) I received the answer:
" YELLOW-Control unit is inworking condition but it is installed in Use Gateway list coding function to add this control unit to Gateway installation list "
I wrote that unfortunately I do not know how to do it and I was directed to the forum.
And now a request to you, explain to me in a simple way how to do it? Regards.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 1, 2018 18:37:49 GMT
valdimar,
Check out this video
What i think it is saying is you have a control unit but you have to add it into your active usable list.
To do this (based on the video at about 0.34) you will see that in the Gateway list you select the blue pen bottom right of the screen. You will then have a list of all the control units its possible to have (don't bother seeing if you can add others because they wont work).
Scroll down till you find the Steering Angle sensor item, Then you tick the box (as shown in video) and now its added to your list (hopefully)
|
|
|
Post by valdimar on Apr 2, 2018 8:34:25 GMT
Thanks for the help, watching the movie reminded me that I saw it somewhere at the first tests of this application, well, man learns all his life Best Regards
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 2, 2018 10:29:25 GMT
your welcome, Hopefully you can do what you want now.
I also learnt today about the yellow status, never come across that one before so thanks for that
|
|