|
|
Post by gogitem on May 11, 2016 21:13:53 GMT
Whenever I try to change anything using the apps I get a message that says, "Battery voltage is low Ensure battery charger is connected and try again." I have always gotten this message, and I am pretty sure that my battery is just fine. here are some screen shots for discussion: this is the warning I get  here is the voltage with the engine running  here is the voltage with the engine not running  any input would be greatly appreciated!! |
|
|
|
Post by OBDeleven on May 12, 2016 11:16:59 GMT
Hi, you need to do following:
Check voltage via dash as you do before then go to Settings > Calibrate voltage and enter the measured value
|
|
|
|
Post by gogitem on May 12, 2016 14:09:35 GMT
that worked great! Thanks again, Admin, for your quick responses!
|
|
|
|
Post by rwallach on Nov 21, 2016 2:29:50 GMT
Hi, you need to do following: Check voltage via dash as you do before then go to Settings > Calibrate voltage and enter the measured value Dear Admin, I am having the same issue here. Voltage shows 0.5 to 0.8 in home screen, but 13.7+ in live data, confirmed by an external voltmeter. Due to this situation, I am not being able to apply configurations through Apps, it will always say "Voltage too low". Already tried to calibrate as instructed. App says "Calibration Successful" in a green band, but when I return to home screen, voltage remains near 0.5V. Currently on version 0.8.2.5 My car is a MY15 Golf MK7. CHPA engine (103 kW). Your help is greatly appreciated. Thanks in advance. |
|
|
|
Post by rwallach on Dec 18, 2016 11:16:39 GMT
Guys,
Any idea or advice here?
In-app battery calibration, as instructed, is not doing the job for me. Indicated voltage in home screen banner will range from 0.4 to 0.8V, although live data will show 13.8+
Thanks again
|
|
|
|
Post by divsec on Jan 4, 2017 21:47:29 GMT
Guys, Any idea or advice here? In-app battery calibration, as instructed, is not doing the job for me. Indicated voltage in home screen banner will range from 0.4 to 0.8V, although live data will show 13.8+ Thanks again Sorry I cannot help you but you might be able to point me to where you found the in app calibration option? Thanks in advance |
|
ci7y
New Member
Posts: 6
|
Post by ci7y on Mar 17, 2019 20:24:32 GMT
did anyone manage to fix this???
|
|
|
|
Post by ralros on Jan 3, 2020 5:09:02 GMT
Hi, you need to do following: Check voltage via dash as you do before then go to Settings > Calibrate voltage and enter the measured value Can you help me, how can I do that ? |
|
|
|
Post by notorioustib on Dec 14, 2020 15:16:22 GMT
Any luck with this issue?
I am have the same exact issue as rwallach. I have attempted to calibrate voltage with no luck. I am unable to use any apps.
|
|
|
|
Post by tiguaniste on Mar 5, 2022 16:30:42 GMT
|
|
