Post by phatassdk on Mar 27, 2018 7:06:57 GMT
Hi gents,
Relatively new OBDEleven user here looking for advice.
I am trying to change my DRLs from the stock Halogen to Osram BA15s LEDs instead.
This type: www.ebay.com/itm/LED-P21W-COOL-WHITE-OSRAM-LEDriving-STANDARD-BA15s-7456CW-02B-6000K-/172855327512
I've changed all other bulbs in the front to LEDs and I am only missing the DRLs.
Unfortunately, there doesn't seem to be any lasttyp setting which accepts the LEDs.
I've been trying to modify:
Leuchte4TFL LB43 Tagfahrlicht vorne links (Scheinwerfer)
- DRL Left
Leuchte5 TFL RB6 Tagfahrlicht vorne rechts (Scheinwerfer) - DRL Right
The standard setting is a 27W halogen light.
When I plug in the LEDs i get an error in the car.
If I then choose something like LED bulb without monitoring, the error dissapears but the LED doesn't light up.
I can measure 12V in the plug when the LED is connected but I get the electronics refuse to supply current?
I have tested the LEDs on a 12V supply and they work.
Any help is appreciated - I cannot seem to figure out what might be causing the electronics not to supply current.
Best regards,
phatty
Relatively new OBDEleven user here looking for advice.
I am trying to change my DRLs from the stock Halogen to Osram BA15s LEDs instead.
This type: www.ebay.com/itm/LED-P21W-COOL-WHITE-OSRAM-LEDriving-STANDARD-BA15s-7456CW-02B-6000K-/172855327512
I've changed all other bulbs in the front to LEDs and I am only missing the DRLs.
Unfortunately, there doesn't seem to be any lasttyp setting which accepts the LEDs.
I've been trying to modify:
Leuchte4TFL LB43 Tagfahrlicht vorne links (Scheinwerfer)
- DRL Left
Leuchte5 TFL RB6 Tagfahrlicht vorne rechts (Scheinwerfer) - DRL Right
The standard setting is a 27W halogen light.
When I plug in the LEDs i get an error in the car.
If I then choose something like LED bulb without monitoring, the error dissapears but the LED doesn't light up.
I can measure 12V in the plug when the LED is connected but I get the electronics refuse to supply current?
I have tested the LEDs on a 12V supply and they work.
Any help is appreciated - I cannot seem to figure out what might be causing the electronics not to supply current.
Best regards,
phatty
