|
|
Post by andreamap on Mar 21, 2018 7:18:50 GMT
Hello, after changing something on my Central Electronics module I noticed that my Led Headlights lost the base levelling configuration, so now they don't level automatically.
I saw on YouTube the module 55-Xenon Range, but on my golf when I use OBDEleven or VCDS 17.8 I don't see that module available.
Also my directional leds are not working correctly.
How can I fix that?
Thanks
|
|
m6nut
New Member
Posts: 5 
|
Post by m6nut on Mar 21, 2018 11:44:03 GMT
Have you tried Basic Settings, in Central Electrics there is a Basic Headlamp Setting run this and then run the Acknowledge basic setting.
I had a similar problem in Multifunction Module, error saying AFS error and doing this sorted it out.
PS Make sure you are on level ground when you run the Basic Settings.
|
|
|
|
Post by andreamap on Mar 21, 2018 16:24:08 GMT
How can I run it on OBDEleven?
|
|
dazz
New Member
Posts: 12
|
Post by dazz on Mar 21, 2018 18:58:22 GMT
From Memory
In Module 55
Adaptions
Run Basic Settings
Acknowledge basic settings
|
|
m6nut
New Member
Posts: 5
|
Post by m6nut on Mar 22, 2018 0:05:54 GMT
|
|
|
|
Post by andreamap on Mar 28, 2018 7:31:44 GMT
I tried it, but it did not work!
Any other solutions?
|
|
m6nut
New Member
Posts: 5
|
Post by m6nut on Mar 28, 2018 15:27:38 GMT
Have you tried running Basic setting in the Multifunction Module (4B)?
Have you any error codes in either Multifunction Module or Central Electronics?
|
|
m6nut
New Member
Posts: 5
|
Post by m6nut on Mar 28, 2018 20:29:40 GMT
Omitted to say make sure when you do this you are parked on level ground
|
|
|
|
Post by Carolco on Jun 7, 2018 19:49:18 GMT
Tu lo has probado?
Lo comentó porque para activar el Fla en el golf facelift es necesario hacerlo....
|
|
