|
|
Post by adiwob on Sept 3, 2019 5:55:06 GMT
|
|
|
|
Post by danielr on Sept 3, 2019 8:23:01 GMT
Sry, yes its PQ46, but not MQB  That's what I really wanted to get out of |
|
kimma
New Member
Posts: 18
|
Post by kimma on Sept 4, 2019 0:34:29 GMT
Actually, mine's pq47h+. Either way I'm getting some resistors I guess, since obdeleven can't do the one thing I wanted it to do.
As for aussietig: If you have nothing constructive to say and you're not really trying to help: don't bother saying anything at all. You still didn't answer my question, and you're still just repeating yourself, yet not trying to actually help disable LED warning. NO, it is not in long coding, as that would be byte 18 which can't be read unless you actually make a change, at which point you won't be able to revert back again since it's written to the EEPROM.
|
|
kimma
New Member
Posts: 18
|
Post by kimma on Sept 4, 2019 0:41:13 GMT
Sry, yes its PQ46, but not MQB That's what I really wanted to get out of I understand it's not MQB, but where does it say that the adaptation solution won't work? When I look at the Ross Tech site, it lists this solution for the Passat B7 as well, not just Golf MK7. |
|
|
|
Post by aussietig on Sept 4, 2019 0:47:43 GMT
I actually spent half an hour yesterday looking through that module but couldnt find anything to do that but now I realise you are on different platform its probably why.
I did own a Passat for 8 years but didnt fiddle with it.
|
|
|
|
Post by danielr on Sept 4, 2019 4:47:19 GMT
Sry, yes its PQ46, but not MQB That's what I really wanted to get out of I understand it's not MQB, but where does it say that the adaptation solution won't work? When I look at the Ross Tech site, it lists this solution for the Passat B7 as well, not just Golf MK7. I know because I have already tried everything. On a BCM from 2012 and 2015. Both with OBD11 as well as with VCDS & VCP (I got it all) |
|
|
|
Post by adiwob on Sept 4, 2019 6:15:32 GMT
If you have VCP did you try to read the eeprom of the bcm and edit it with VAGHelperX ?
|
|
kimma
New Member
Posts: 18
|
Post by kimma on Sept 4, 2019 6:45:19 GMT
I actually spent half an hour yesterday looking through that module but couldnt find anything to do that but now I realise you are on different platform its probably why.
I did own a Passat for 8 years but didnt fiddle with it.
Then I apologise, didn't realise you were actually trying to help. Ye, seems there are quite a lot of differences depending on platform. |
|
kimma
New Member
Posts: 18
|
Post by kimma on Sept 4, 2019 6:47:16 GMT
I understand it's not MQB, but where does it say that the adaptation solution won't work? When I look at the Ross Tech site, it lists this solution for the Passat B7 as well, not just Golf MK7. I know because I have already tried everything. On a BCM from 2012 and 2015. Both with OBD11 as well as with VCDS & VCP (I got it all) Did you manage to do it with VCP? I'm still left with an inkling feeling that with the right code, we could get to security access and then change adaptation, just like in the golf, but without the access code there's no way of finding out I guess. |
|
|
|
Post by danielr on Sept 4, 2019 8:11:50 GMT
If you have VCP did you try to read the eeprom of the bcm and edit it with VAGHelperX ? Yep, doesn't work . Can't disable the diagnostic for fog lamp :/ |
|
|
|
Post by adiwob on Sept 4, 2019 8:48:41 GMT
Well, this was the last chance to make it work.
|
|
That's what I really wanted to get out of