|
Post by davido2490 on Mar 10, 2018 5:13:09 GMT
Hello Recently i bought a obd eleven . Upon getting this device i entered a code that i found to roll the windows down using the key fob, and when that was entered it changed my clock to 24 hr my engine miles to total km ,and in the center cluster where it shows the miles to emty it was to changed to km . One last thing I filled my tank today but the gas gauge is under half and the gas light.
If anyone can help with these problems .it would be grealy appriciated
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 10, 2018 8:31:04 GMT
dont know your car but it sounds like you have changed country of dash. you can either reverse all the code or post the code here and somebody may be able to work it out
|
|
|
Post by davido2490 on Mar 12, 2018 2:38:25 GMT
Would you be able to tell me how to reverse the codes entered
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 12, 2018 19:07:54 GMT
davido if you go to your history function it will show you all the changes you have made to your car. Firstly check that you have made the change as per your original instructions (as we all make mistakes). If its all good then when you look at History you will see Old and New Value, so all you have to do is go back in and change them back so they are as they were to start with. Hope that helps. PS If there were lots of changes then in the history screen top right there is a email envelope sign, click on that and it will send a file that looks something like this.
|
|