Post by b5b6 on Mar 4, 2018 20:52:51 GMT
VW Passat B5
I’m trying to run the Evaporative Valve test (Basic settings, Block 070). See attached screen shot. I don’t see any way to start the test. It always says “Test OFF”, with no results under “Status”.
I also tried Block 071 (Fuel tank leak test) - it cycles between "Test OFF" and "Test ON", but does not generate any results.
No DTC codes stored. Coolant Temp = 190F. I have the key on, engine off for these tests. I then tried with engine idling @ 680 RPM. After 3 minutes, still no test results and no indication that test had even started.
Screen shot: drive.google.com/file/d/16ZCIcfF3sTFqFVrtXR_38AFfLvJuv2nj/view
Thanks.
I’m trying to run the Evaporative Valve test (Basic settings, Block 070). See attached screen shot. I don’t see any way to start the test. It always says “Test OFF”, with no results under “Status”.
I also tried Block 071 (Fuel tank leak test) - it cycles between "Test OFF" and "Test ON", but does not generate any results.
No DTC codes stored. Coolant Temp = 190F. I have the key on, engine off for these tests. I then tried with engine idling @ 680 RPM. After 3 minutes, still no test results and no indication that test had even started.
Screen shot: drive.google.com/file/d/16ZCIcfF3sTFqFVrtXR_38AFfLvJuv2nj/view
Thanks.