Hey all! I'm very green to all this coding, and this will be my first instance in trying to do any coding with my car. I have a 2008 GTI with the FSI engine. This is a left hand drive US spec car. I recently purchased and installed a set of SPEC D TUNING Euro lights. As you may know: US spec taillights come with two reverse lights; and euro spec has one reverse light and one rear fog light. What I want to do is have the rear fog light come on when I turn my fog light switch on. I would also like for the fog light to stop coming on when I click my car into reverse. My car is 6MT if that makes any difference. Thanks in advance!!!
I too am looking to enable this feature on my car I do have the Euro switch with auto setting but my lights are stock OEM U.S. spec does that matter? Also I know that I have to do some wiring with a yellow trigger wire how do I accomplish that part? I have purchased that trigger wire already but have not installed to the harness. Any help would be appreciated!
As it relates to the actual wiring, I have no clue about that, although there is some wiring to be done before the coding to make it work correctly.
My lights are the stock Right-Hand-Drive model that comes with 2 semi-circles for the outer light, and the amber indicator in the center of the 2 hemispheres (on the body of the vehicle. The trunk lid has the reverse light and fog light bullb installed.
sofianethiais: bonjour je peut pas coder lunité 9 controle unit de ma polo 2019 jai essayer avec iphone et android
May 28, 2020 20:02:49 GMT
senortoasty2000: Hello everyone, I was wondering if anyone knows how to use the OBDeleven to make it so the headlights I ordered (Ed's LEDS)have the amber LED turn signals always on. I have a 2017 base model GTI
May 29, 2020 0:11:19 GMT
majestic12: Hellol everyone, does anybody has also needle sweep lag ? its not smooth on my virtual cockpit. where can i report this ?
May 29, 2020 14:19:50 GMT
testeronline: majestic12 I would suggest you let VW/AUDI Know as this is there software. Just as an aside what car do you have as I did not think the virtual screens supported this so just trying to increase my knowledge
May 29, 2020 14:33:02 GMT
dv52 (Australia): testeronline: needle sweep can be enabled on some AID displays. In majestic12's case, I suspect the facility is getting delayed because of all of the other start-up activities that happen on ignition switch-on (but I'm guessing)
May 29, 2020 21:53:48 GMT
audia4b8: Hi, I have the same problem, did you manage to solve it? I have been struggling with this for a month and I also have no way of changing it as they write above. It is not possible to change 0 - 1 and vice versa. Through the application and points also does
May 30, 2020 5:58:23 GMT
majestic12: Yea i though so it would be the processes that are starting up when turning on the ignition, maybe they can fix it by doing needle sweep when turning the engine on. Would be cooler to me when starting the engine you see the needle sweep
May 30, 2020 9:44:56 GMT
vwjap: Needle sweep works fine on my AID
May 30, 2020 14:53:43 GMT
face0704: hello has someone a coding for skoda fabia 2017, to open the mirrors with the kessy remote?
May 31, 2020 5:20:24 GMT
testeronline: vwjap, I just checked on the Leon Forums and currently V1 and V2 of the dash does not support needle sweep, however it looks like v3 (as fitted in the Atteca) does. Lucky I have the old dials and they do support it (not that I ever look at it )
May 31, 2020 13:11:15 GMT
sgt1297: blackfist13: is there a problem with the car? If not reset all the error codes and see if they come back. If you have issues with the car go through each symptom using the fault codes as a reference. Make model and year?
Jun 1, 2020 19:50:49 GMT
vwlotech: hello, i wasn't able to locate exact trouble code in the search. My pass side mirror puddle light is not getting any power to it. this is what I'm seeing, all of my codes match the drivers door which is working fine, i tested the circuit
Jun 4, 2020 17:46:02 GMT
vwlotech: getting this code B13C801 - Door ambient lighting / lighting for speakers Electrical error static - Priority: 3 - Malfunction frequency counter: 6 - Unlearning counter: 83
Jun 4, 2020 17:50:16 GMT
shabbe: I have to OBDeleven pro for iOS and trying to code my rare tail lights but can't make it happen. I watched loads of videos but that's only for the Android. I chose adaptation channel list but where can I chose minimise or maximize?
Jun 5, 2020 11:23:23 GMT
BallyRS: Unable to load new apps, ignition is on and can see the value of apps I've previously enabled.
Jun 6, 2020 2:08:32 GMT
guest: Question: Does a batterie disconnect delete all coding?
Jun 6, 2020 11:47:21 GMT
Polo security access code: Year 2014. 6R. Central electric code. Or complete code list. Want to have Skandinavien DRL
Jun 6, 2020 19:00:58 GMT