Post by andy1977 on Feb 17, 2018 20:26:01 GMT
I have achieved this with the following instructions.
www.flickr.com/gp/99592808@N03/1Hy731
Flashing lights DRL with LED simultaneous
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte2SL VLB10
4 - Sub - Lichtfunktion G 2
5 - Change value Blinken links Dunkphase
6 - Select - Leuchte2SL VLB10
7 - Sub - Dimmwert GH 2
8 - Change to the desired value
9 - Select - Leuchte2SL VLB10
10 - Sub - Dimming direction GH 2
11 - Change value to Minimize
12 - Select - Leuchte3SL VRB21
13 - Sub - Lichtfunktion G 3
14 - Change value Blinken links Dunkphase
15 - Select - Leuchte3SL VRB21
16 - Sub - Dimmwert GH 3
17 - Change the desired value
18 - Select - Leuchte3SL VRB21
19 - Sub - Dimming direction GH 3
20 - Change value to Minimize
But what I really want is to reverse the phase of the DRL to light when the indicator goes out, can anybody help please?
www.flickr.com/gp/99592808@N03/1Hy731
Flashing lights DRL with LED simultaneous
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte2SL VLB10
4 - Sub - Lichtfunktion G 2
5 - Change value Blinken links Dunkphase
6 - Select - Leuchte2SL VLB10
7 - Sub - Dimmwert GH 2
8 - Change to the desired value
9 - Select - Leuchte2SL VLB10
10 - Sub - Dimming direction GH 2
11 - Change value to Minimize
12 - Select - Leuchte3SL VRB21
13 - Sub - Lichtfunktion G 3
14 - Change value Blinken links Dunkphase
15 - Select - Leuchte3SL VRB21
16 - Sub - Dimmwert GH 3
17 - Change the desired value
18 - Select - Leuchte3SL VRB21
19 - Sub - Dimming direction GH 3
20 - Change value to Minimize
But what I really want is to reverse the phase of the DRL to light when the indicator goes out, can anybody help please?
