|
|
Post by vwcalifornia on Feb 17, 2018 20:25:54 GMT
Hello everyone, I have noticed that the dynamic blinkers are not working for me, I don't know if it can be because I have played some value that I shouldn't with the obdeleven.
You know what encoding is that of dynamic indicators?
Greetings
|
|
|
|
Post by dv52 (Australia) on Feb 17, 2018 22:37:16 GMT
^^^ Hi - I don't believe that there is a "coding" value that operates the dynamic blinkers on a mk7.5. The "dynamic" function is operated by hardware - there is a LED chaser ciruit inside the fittings.
Did you modify the normal leuchte- command Blinken rechts Hellphase (right-side), or Blinken links Hellphase (left-side)? on the Leuchte-sets for the rear blinkers?
Have a look at your history records in the central electrics module for changes involving these leuchte-commands
Don
|
|
|
|
Post by vwcalifornia on Apr 25, 2018 5:46:24 GMT
Now my boot door indicators are not working anymore, only the exterior ones are working, I've been looking at the coding and I can't find where this problem is.
What do you think could be the reason for this ruling?
A greeting.
|
|
|
|
Post by lovic87 on Apr 28, 2018 4:42:00 GMT
^^^ Hi - I don't believe that there is a "coding" value that operates the dynamic blinkers on a mk7.5. The "dynamic" function is operated by hardware - there is a LED chaser ciruit inside the fittings. Did you modify the normal leuchte- command Blinken rechts Hellphase (right-side), or Blinken links Hellphase (left-side)? on the Leuchte-sets for the rear blinkers? Have a look at your history records in the central electrics module for changes involving these leuchte-commands Don There is a "dynamic blinker" (dynamisch?) Option with a time value, under the ZV categories or one of the außenlich categories, can't remember which, that was possibly what his question referred to? |
|
|
|
Post by vwjap on Apr 28, 2018 22:07:50 GMT
You do actually have the dynamic tails don’t you? As it’s not a coding option
|
|
|
|
Post by vwcalifornia on Apr 29, 2018 11:35:43 GMT
Yes, my car has them as standard, in fact before I had to use the obdeleven they worked.
I'm sure it's something I've touched or an app I've used, but I can't find the problem
|
|
|
|
Post by vwjap on Apr 29, 2018 11:40:51 GMT
I haven’t got them otherwise I’d send you my central electronics module adaptions, maybe someone else will help
|
|
|
|
Post by vwcalifornia on May 7, 2018 9:44:28 GMT
I would be very grateful if you could send me a copy of your central module, see if I can find out where the problem is in mine.
Greetings and thanks.
|
|
crow
New Member
Posts: 29
|
Post by crow on May 11, 2018 12:00:56 GMT
Hello !
Did your 2 dynamic blinker dont work !? Or only one side !?
Did you change something at leuchte 27 !?
Can you make a screen plz with adaptation of leuchte 26 27 !?
I did it too last time ,and the dynamic blinker on the right side stoped ,like the previous Golf 7 before facelift ,but i fixed it
|
|
|
|
Post by arghgolf on May 15, 2018 20:48:32 GMT
Hey, did you get the issue resolved? I'm curious what the settings are. I was told coding was required after the 7.5 dynamic blinkers were installed.
|
|
|
|
Post by vwcalifornia on May 24, 2018 13:56:12 GMT
Hey, they don't work for me from anywhere.
And if I'm afraid that at some point I've touched the leuchte26 -27 configuration, that's how I have it right now:
Leuchte26NSL LA72:
Lasttyp 26:
43 - allgemeine LED
Lampendefektbitposition 26:
c
Fehlerort mittleres Byte DTC-DFCC 26:
2e
Lichtfunktion A 26:
Nebelschlusslicht wenn kein Anhaenger gesteckt und Rechtsverkehr
Lichtfunktion B 26:
nicht aktiv
Dimmwert AB 26:
127
Lichtansteuerung HD AB 26:
only_if_closed
Lichtfunktion C 26:
nicht aktiv
Lichtfunktion D 26:
nicht aktiv
Dimmwert CD 26:
0
Dimming Direction CD 26:
maximize
Lichtfunktion E 26:
nicht aktiv
Lichtfunktion F 26:
nicht aktiv
Dimmwert EF 26:
0
Dimming Direction EF 26:
maximize
Lichtfunktion G 26:
nicht aktiv
Lichtfunktion H 26:
nicht aktiv
Dimmwert GH 26:
0
Dimming Direction GH 26:
maximize
Leuchte27NSL RC6:
Lasttyp 27:
inactivo
Lampendefektbitposition 27:
0
Fehlerort mittleres Byte DTC-DFCC 27:
0
Lichtfunktion A 27:
nicht aktiv
Lichtfunktion B 27:
nicht aktiv
Dimmwert AB 27:
0
Lichtansteuerung HD AB 27:
only_if_closed
Lichtfunktion C 27:
nicht aktiv
Lichtfunktion D 27:
nicht aktiv
Dimmwert CD 27:
0
Dimming Direction CD 27:
maximize
Lichtfunktion E 27:
nicht aktiv
Lichtfunktion F 27:
nicht aktiv
Dimmwert EF 27:
0
Dimming Direction EF 27:
maximize
Lichtfunktion G 27:
nicht aktiv
Lichtfunktion H 27:
nicht aktiv
Dimmwert GH 27:
0
Dimming Direction GH 27:
maximize
Greetings and thanks.
|
|
crow
New Member
Posts: 29
|
Post by crow on May 26, 2018 22:01:51 GMT
Hello !
In luchte 27
In the place A ,put the value : Active blinkfunktion hat ein auf 1 . . .dynamich bminken
Than maximize dimming 100
Tell me if it works ,i remember that luchte 27 has this value in A
Luchte 27 is the right side ,test it and tell me ,im sure the probleme is here ,i already did a mistake in luchte 27 and the right dynamic blinker stoped
|
|
|
|
Post by zero815 on May 27, 2018 14:12:02 GMT
Change the Leuchte27 settings back to the following:  |
|
crow
New Member
Posts: 29
|
Post by crow on May 29, 2018 22:08:20 GMT
Change the Leuchte27 settings back to the following: Just what i said ,thanks for the complete adaptation |
|
