|
|
Post by trident on Feb 15, 2018 23:08:09 GMT
Hi Need help resolving adaptive headlight error and wipers not working on a 2017 s1 Comp. Had obdeleven plugged in and used "rain lights" and "Tear drop" buttons in app section now have dynamic range warning and wipers will not switch on. Any help appreciated as wife has only had the car 2 days an I've managed to screw it up. vagcom fault says
0152 Rain and light recognition sensor (G397)
0004 no signal/communication
Fault Status 01100100
Fault priority 2
Freeze frame
Term 15 on
Voltage 12.10
ON
ON
Term 50 on
OFF
OFF
00153 Windshield wiper motor; Driver side (v216)
004 No Signal/Communication
as above
Any help greatly appreciated guys,
|
|
|
|
Post by krystian660 on Apr 19, 2018 5:26:28 GMT
Try to do this app again but with value "off".
|
|
mac
New Member
Posts: 22
|
Post by mac on May 21, 2018 16:05:34 GMT
Hi Need help resolving adaptive headlight error and wipers not working on a 2017 s1 Comp. Had obdeleven plugged in and used "rain lights" and "Tear drop" buttons in app section now have dynamic range warning and wipers will not switch on. Any help appreciated as wife has only had the car 2 days an I've managed to screw it up. vagcom fault says 0152 Rain and light recognition sensor (G397) 0004 no signal/communication Fault Status 01100100 Fault priority 2 Freeze frame Term 15 on Voltage 12.10 ON ON Term 50 on OFF OFF 00153 Windshield wiper motor; Driver side (v216) 004 No Signal/Communication as above Any help greatly appreciated guys, Did you get this fixed in the end? I'm having the same issue with my wipers |
|
macxe
New Member
Posts: 1
|
Post by macxe on Dec 5, 2018 15:22:30 GMT
Hi, I had exactly the same issue with this adaptation.
It turned out to be very costly as I had no headlights or front windscreen wipers! After a trip to Audi and being relieved of £207 later, they had to recode it back to factory settings.
Please do not use the rear wiper tear drop code as it was this function that caused the error. Even after turning the function off the damage was already done.
I have since used nearly all the pre-use apps with no issues, just the tear drop so, please be careful!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 5, 2018 16:54:05 GMT
And just to add to this, MAKE SURE YOU MAKE A BACKUP OF ALL YOUR CONTROL UNITS BEFORE YOU START.
That way when stuff goes wrong you are able to code it back to how it was.
This includes the apps as the backup compare will enable you to work out what has changed.
|
|
|
|
Post by taylo12 on May 9, 2020 18:48:57 GMT
For anyone who gets this error, it is to do with the long coding for the central electronics unit.
When you use the app for rear wiper tear drop, the app overrides the long code on the car in 'central electronics' to something completely different which then causes the headlight range control error and stops the wipers from working.
To fix this, you need to have the original long code for 'central electronics' which you can get from OBDEleven under 'my car' and then 'history' I luckily emailed myself the scan log before I made changes and I got the original long code from that email.
I am not sure if you can long code from the OBDEleven phone app but I had a garage with VCDS software change the long code back to the original for me.
Hopefully this saves other people from a lot of frustration and wasted money trying to get their cars working again. This problem with the tear drop app needs to be looked into by Voltas as it is breaking people's cars.
|
|
|
|
Post by mattiasdy on May 7, 2021 20:23:23 GMT
Hi,
I haven’t read this before a did the rear wiper coding so now is my wife’s car also “broken”
Can you explain how I can do I in OBDELEVEN to fix it?
Have the pro version so I have access to the long coding.
Thanks in advance for the help and support.
|
|
|
|
Post by boxster1965 on Nov 30, 2021 20:58:28 GMT
Hi Matt
Did you get this sorted mate 🤷
|
|
