|
|
Post by frapid on Feb 13, 2018 19:41:03 GMT
As mentioned , my car menu says it is not available, when I'm driving I cannot see my driving data on here but it shows me in my dash display. Can anybody help please?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 13, 2018 20:43:10 GMT
have you made any changes to the control module 5F
|
|
|
|
Post by frapid on Mar 7, 2018 17:15:11 GMT
Sorry for the response I didn't get a notification , it is a retrofit on a 2014 model That's what I am seeing , and I do not have range data, is a FEC code missing or have I not selected the correct vehicle in the 5F menu on long coding? I have matched up both old and new channel maps and they are the same now  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 7, 2018 21:39:58 GMT
I don't know the answer but happy to have a look to see if I can find one.
What have you retrofitted just the screen or have you put in a complete MIB2 unit.
Did you have to do anything to resolve component protection (just trying to understand what else can be causing problems.
Cheers
|
|
|
|
Post by frapid on Mar 8, 2018 18:58:38 GMT
The complete MIB2 unit has been changed. The component protection was removed and everything bar the ' car function, and driving data isn't working . I either think the vehicle I have it set to in long coding isn't quite correct or maybe I'm missing a function enabling code?
Appreciate your help!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 8, 2018 21:04:32 GMT
OK Let me have a look and see if I can find anything. Cant promise anything but I will have a look.
|
|
