|
Post by andy1977 on Feb 13, 2018 6:27:58 GMT
HI I'm having trouble with the most basic bit of coding. As above I cant get the carbon background on the FIS to work on my 2013 Leon FR. The coding i used is below and seems to complete just fine but after the background is the same black. Can anyone help or does anyone know why this would be?
Its almost as if my car doesn't have the background stored
1 Module 17 Dashboard
2 Adaption
3 display depiction
4 select Version 2
5 Hold the green tick till it confirms
I also couldn't get the carbon on the infotainment unit with OBDeleven, i had to use the engineering menu.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 13, 2018 7:55:55 GMT
|
|
|
Post by andy1977 on Feb 13, 2018 8:37:43 GMT
Hi yes, it is a colour display the same as that.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 13, 2018 9:03:08 GMT
OK Thats the normal problem,
Please dont take offense but are you sure you saved the changes (have you checked your history and backup to ensure its saved)
Does your coding now look like this
Display depiction: Version 2
Last suggestion have you tried using the app (its only 10 credits of which you get 6 free a day so its free)
|
|
|
Post by andy1977 on Feb 13, 2018 9:42:54 GMT
Yes i'm 100% sure, although its not showing as Version 2 at the minute because when it didn't work I changed it back to version 1. Unless i'm mistaken there isn't an app for this setting.
I will have another go at this tonight and post a screen shot of the changed value.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 13, 2018 17:05:44 GMT
Sorry my error there is no app (sure there used to be one). Just did this again on my 2014 car, turned it off and then back on and the screen changes straight away.
|
|