|
Post by paul777 on Feb 3, 2018 14:52:22 GMT
Is there any way to get to tool to dump a list of all possible adaptation for all the modules along with the value options. This would greatly assist with working out what was possible and also with translating some of the options.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 3, 2018 15:24:25 GMT
If you do a backup of each control unit, you can email them to yourself and then you will be able to see
1/ The Software/Hardware details 2/ Long Coding setup codes 3/ All the adaptations with the current setup.
I have not yet seen a list of all the options that each one has, I just started recording the info on Excel for my car.
|
|
|
Post by paul777 on Feb 3, 2018 20:17:24 GMT
Thanks, that's a good start - although the format isn't good for browsing through. Would be great if it could do a one click backup of control units and then save it as a structured xml file.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 3, 2018 22:46:12 GMT
Glad it helps and I have used it for a couple years now and found it very easy to visually read.
In excel if there field value has 4 blank spaces at the start then its either the control unit name (which always starts Control Unit:, or its System/Hardware details, or Long Coding Value.
If the field value has 8 Blank spaces at the start then it is one of the values you see in the app under adaptions.
If the field value has 16 Blank spaces at the start then its the value assigned to the above.
So I am guessing you could easily convert to XML File.
As the format does not change just the values I have never found the need to do anything on this but we all work in different ways.
Have Fun.
PS I am sure there is more detail than the above but as i say I have never found the need but it is a structured output.
|
|