Post by tos on Nov 21, 2024 18:07:35 GMT
I have had this code more than 2 years.
I have lot of recorded fault readings.
And I know that there is TPI for that, VW should change the box under gear selector.
Why I cant clear it anymore, obd11 says error.
Why?
02 Transmission
System description: GSG DQ200G2.1
Software number: 0CW906556M
Software version: 0562
Hardware number: 0CW300051N
Hardware version: H07
Serial number: CU502104055091
ODX name: EV_TCMDQ200022
ODX version: 001001
Long coding: 0014
Trouble codes:
P082B00 - Gear Lever X Position Sensor 1 Circuit Low
Intermittent
Date: 2024-11-04 06:05:34
Mileage: 56070 km
Priority: 0
Malfunction frequency counter: 4
Unlearning counter: 38
Engine speed: 115.00 1/min
Engine torque: -40 Nm
Vehicle speed: 0 km/h
Control module temperature: 4 °C
CURRENT pressure: 21.0 bar
Clutch, primary stat: Neu
Selected gear: Gang_R
Driving position: P
Accelerator position: 14.5 %
DTC memory status: 8
![]()
![]()
I have lot of recorded fault readings.
And I know that there is TPI for that, VW should change the box under gear selector.
Why I cant clear it anymore, obd11 says error.
Why?
02 Transmission
System description: GSG DQ200G2.1
Software number: 0CW906556M
Software version: 0562
Hardware number: 0CW300051N
Hardware version: H07
Serial number: CU502104055091
ODX name: EV_TCMDQ200022
ODX version: 001001
Long coding: 0014
Trouble codes:
P082B00 - Gear Lever X Position Sensor 1 Circuit Low
Intermittent
Date: 2024-11-04 06:05:34
Mileage: 56070 km
Priority: 0
Malfunction frequency counter: 4
Unlearning counter: 38
Engine speed: 115.00 1/min
Engine torque: -40 Nm
Vehicle speed: 0 km/h
Control module temperature: 4 °C
CURRENT pressure: 21.0 bar
Clutch, primary stat: Neu
Selected gear: Gang_R
Driving position: P
Accelerator position: 14.5 %
DTC memory status: 8
