lyate
New Member
Posts: 10 
|
Post by lyate on Apr 18, 2016 21:49:16 GMT
I see that using VCDS the following instructions:
1. Select 02-Auto Transmission
2. Select 10-Adaptation
3. Open with “down arrow” and scroll down to and select Single Gear Display
4. Under new: Open and select D on/S on.
5. Do it!
How is this possible to effect in Obdeleven?
LIY
|
|
|
|
Post by OBDeleven on Apr 19, 2016 10:05:58 GMT
I see that using VCDS the following instructions: 1. Select 02-Auto Transmission 2. Select 10-Adaptation 3. Open with “down arrow” and scroll down to and select Single Gear Display 4. Under new: Open and select D on/S on. 5. Do it! How is this possible to effect in Obdeleven? LIY Same way go to Transmission control unit > Adaptations > search something similar to Single Gear Display and change settings. |
|
lyate
New Member
Posts: 10
|
Post by lyate on Apr 19, 2016 13:56:33 GMT
Many thanks for your remarkably quick reply!
However, I see no way to enter a word search. It appears to be asking for a channel number.
Any further instruction will be greatly appreciated!
Lyate
|
|
lyate
New Member
Posts: 10
|
Post by lyate on Apr 20, 2016 10:39:45 GMT
Further, I note that within the Transmission module, there is no Adaptation channel.
|
|
