|
|
Post by jsinner on Nov 12, 2024 17:46:20 GMT
Hi all  New here to OBD11, I bought the device to tune some stuffs but also to do maintenance on my cool Audi A8 b8 3.0 tdi Allroad manual gearbox Here is a screenshot of what I can find under "19 Gateway" : I really don't understand what is going on here. It's important because I switched from EFB battery to AGM...  |
|
|
|
Post by whataboutthis on Nov 12, 2024 23:00:53 GMT
Do you have control unit 61
|
|
|
|
Post by jsinner on Nov 13, 2024 7:00:21 GMT
Hi no sadly I only got 19 Gateway. I also have the two wires "sensor" connected to the négative pole of the battery. Seems I can type some value in Chanel 4 under the very long hex number but I absolutely don't understand what to do since my screen show differents items and organisation in the app than those I saw on the internet tutorials "battery adaptation"... |
|
|
|
Post by whataboutthis on Nov 13, 2024 9:04:35 GMT
have a look at www.cupra280.co.uk/Battery%20Coding.html#two this might help you understand what needs to be input. However with regards to the EFB to AGM All I have seen on this (and I cant find the original post anymore) is that the BEM Sticker on the battery will tell the software what type of battery you have but as i said I dont have the original post (which had some examples) to confirm that. |
|
|
|
Post by jsinner on Nov 13, 2024 10:20:18 GMT
Thank you for the answer Here is what I did : I found the BEM code of an OEM Varta battery AGM (Mine is a Napa, same EN / Same Ah, same technology) Under the value I entered this BEm code and it accepted it. What I did right after that is monitoring the battery at Idle and while the car was in movement with beams on and heated seats on : Had a constant 14.30V approx. Monitoring said all is ok, no undervoltage, no overvoltage. Seems ok to me then... |
|
