Post by Aiwa on Jan 28, 2018 23:12:11 GMT
A simple way to change the look of the tail lights. I took only 15 minutes (see photos). No faults on dashboard and via diagnostic.
1. Remove left and right outside tail lights
2. Open the stopper
3. Cut the black wire #3 for left tail light (6 pins connector)
4. Cut the black wire #4 for right tail light (6 pins connector)
5. Assemble tail lights to car. DONE
EXTRA
A small switch can be wired to the wires so that you can easily turn on and off the LED segment
1. Remove left and right outside tail lights
2. Open the stopper
3. Cut the black wire #3 for left tail light (6 pins connector)
4. Cut the black wire #4 for right tail light (6 pins connector)
5. Assemble tail lights to car. DONE
EXTRA
A small switch can be wired to the wires so that you can easily turn on and off the LED segment
Attachments:
