|
|
Post by evomark on Jan 25, 2018 21:29:43 GMT
Does anyone know how to code a 2007 A4 B7 MMI stereo to use an aux lead? I have the hardware in place but cannot seem to get the obdeleven to code for aux.  I have been able to code a couple of things successfully however am stumped at this one Thanks |
|
jr89
New Member
Posts: 2
|
Post by jr89 on Sept 27, 2018 22:59:29 GMT
Hi evomark,
I am currently facing exact the same problem. Were you able to manage it somehow?
|
|
jr89
New Member
Posts: 2
|
Post by jr89 on Oct 18, 2018 18:03:49 GMT
OK I got it running now. Had to change code of Navigation (37) from 0301717 to 0301757. Important is to change the second last digit to 5 to enable Aux. Also you need to change Navigation Firmware to version 6.5. I had 6.0 and after coding it still wasn't running, so I bought a new Rsne Navigation DVD (has to be newer than 2007). Right after putting in the DVD it was updating the firmware. After that Aux was available.
|
|
|
|
Post by audiwha on Nov 28, 2019 12:18:27 GMT
Do you need the pro version to do this, or will I be able to enable aux with the first gen device?
|
|
|
|
Post by patricos87 on Dec 1, 2019 8:55:11 GMT
Do you need the pro version to do this, or will I be able to enable aux with the first gen device? I think u must have PRO... |
|
|
|
Post by amaan07974 on Mar 12, 2022 18:08:51 GMT
OK I got it running now. Had to change code of Navigation (37) from 0301717 to 0301757. Important is to change the second last digit to 5 to enable Aux. Also you need to change Navigation Firmware to version 6.5. I had 6.0 and after coding it still wasn't running, so I bought a new Rsne Navigation DVD (has to be newer than 2007). Right after putting in the DVD it was updating the firmware. After that Aux was available. Hello mate how did you access the navigation coding. As I can not find it. Which control unit do I have to go into. |
|
|
|
Post by jamo182 on Apr 14, 2024 13:50:57 GMT
I’ve recently bought an Audi a4 b7 2008 and I installed a Bluetooth and phone adapter but need to code in the AUX I’ve tried with my OBDeleven but it’s not picking up that module as it’s got the black circle. I have software version 650 but no nav disk installed. Not sure if this makes a difference. I’ve read somewhere you may need to move the Kline how would you go about doing this if so?
Or any advice as to how I can solve this.
Thanks
|
|
|
|
Post by jamo182 on Apr 14, 2024 20:55:09 GMT
I sorted it.
i had to plug all the original wiring back in without the bluetooth adapter this allowed the navigation 37 to be available for long coding.
|
|
