Traffic Sign Recognition Enable

Hi All,

I'm trying to enable Traffic Sign Recognition but although I've been able to get the settings on the MMI and the display in cockpit it only ever said no recongised signs (the typical one).


My car has lane assist, satnav high, GEN2, Presense front, Matrix LEDs with Auto High beam. 

Reading around it would seem it can do it?

I tried the below link but this didnt work and it seems next day I used it the 360 system is broken and not displaying any video feed with 3D being greyed out.

Reverted it all and then let the car shutdown, went back to it and it's fine again now. 

www.vwroc.com/forums/topic/41267-coding-traffic-sign-recognition-if-you-don%E2%80%99t-have-it-aka-dynamic-road-sign-display/

I've also seen the below instructions, not sure if these would work for my car? Audi A6 2019 Facelift.

Additional to that I see an option called VZAPro which is currently off and have seen references stating it should be turned on? 



Traffic Sign Assist Activation



1. Control Unit 5F - Information




Adaptation


Car_Function_List_BAP_Gen2

traffic_sign_recognition_0x21 = Activated, then Green tick


Car_Function_Adaptions_Gen2

menu_display_road_sign_identification = Activated, then Green tick





8. Control unit A5 (front / advance camera)




Security access - 20103

Control unit Long Coding 


Byte 16 
Bit 04 Activate , then Green tick




13. Control unit 17 (Dashboard)




Control unit Long Coding 


Byte 5
 Bit 02 Activate, then Green tick


Any Advice would be appreciated, I know there's probably more data I can provide but new to this all and was lucky I could solve the 360 issue.
Many thanks,
Alex