Headlight regulation error

new

« Prev
1
Next »

kubinf
New Member

Posts: 23

Headlight regulation error Jan 24, 2018 21:26:16 GMT

Quote

Post by kubinf on Jan 24, 2018 21:26:16 GMT

Hi,

I was playing with the headlights and I changed the following:

(55) Headlight regulation

Adaptation

Active left/right-hand drive switch-over

Not Active -> Active

After that, the LED lights came down and up and a message appears on the dashboard saying something like "Lights configured for left-hand drive car"

Then I changed it back, but no message appeared. And a few seconds later a got an error Headlight regulation malfunction (on dashboard and in OBD as well) and I can not delete it after the scan. I got all changes back but the error is still appearing. I delete it with OBD, the lights go down and up (as they do when you start the car) and the error appears again.

Any help?

Thanks

Deleted
Deleted Member

Posts: 0

Headlight regulation error Jan 24, 2018 22:36:01 GMT

Quote

Post by Deleted on Jan 24, 2018 22:36:01 GMT

I had a play with this setting a while ago and like you I got the warning saying you had switched lights over but it did not appear to do anything.

When I went back in to reset it I got an error and it would not let me change it back.
I then Had to reboot phone and re insert the OBD11 Dongle then it let me change it back again but after that I got no error.

First thing I would do if it were my car is double check in your history that the change back has worked.
If it did work then I would have a look in the Basic settings area as I am sure there will be something here that allows you to reset the lights.
Also worth a check against the actual error code to see if anybody else has had a fix for it.

But before you do any changes have a google or on here to see if anybody knows the correct procedure for resetting the lights (I do not I am afraid.)

Hope that helps.

ps just seen this thread on the Golf Forum obdeleven.proboards.com/thread/434/headlight-adjustment

Last Edit: Jan 24, 2018 22:43:54 GMT by Deleted

kubinf
New Member

Posts: 23

Headlight regulation error Jan 25, 2018 7:20:41 GMT via mobile

Quote

Post by kubinf on Jan 25, 2018 7:20:41 GMT

Thank you for your help. I managed to solve this with this:

It seems that the adaptation “Active left/right hand drive switchover” is some sort of a special function, which when you enable it changes automatically the car lights for left or right-hand drive car.

So fisrt I activate it once more to change the lights back to left-hand drive (I am from CZ), then I tried to delete the error via OBD but it did not work. The error appeared again. So I followed your advice and reset the basic settings and the error message disappeared from the dashboard. Then I delete the error via OBD and everything was alright. No error and lights are working correctly.

I am never messing with this again

Thank you for your help

Shoutbox

Please don't use the shoutbox for complex questions! For those questions please create a thread in the right subforum.

ivankoterlyn: Seat Alhambra2015 I tried to unlock Full Link with one click. But the program did not unlock, but the money was withdrawn Nov 11, 2024 18:54:25 GMT

whataboutthis: ivankoterlyn you need to talk to support and get a refund if it took money but did not work. Nov 12, 2024 15:28:34 GMT

georgegianna: Recover Your Lost Coins with Paradox Recovery Wizard

I just wanted to express my heartfelt gratitude for your incredible help in recovering my lost funds. Your expertise and dedication have truly made a difference, and I’m so thankful for the support you’ Nov 15, 2024 19:31:32 GMT

derpandabear: Hi everyone, it's been two weeks since I've posted my question. I would greatly appreciate it if anyone can respond to my thread: forum.obdeleven.com/thread/28144/summertime-setting-mk8-golf-gti. Thanks and Best Regards! Nov 16, 2024 19:49:09 GMT

bmwg30lci: sveiki,noreciau gauti daugiau informacijos apie jusu produkcijos paskirti.ar imanoma pakeisti salone migtuku spalvas?pvz; pas bmw g30 lci tamsoje sviecia oranzine spalva o diena balta.as noreciau,kad visuomet butu tik baltas mygtuku pasvietimas. Nov 18, 2024 8:02:36 GMT

whataboutthis: @bmwg201ci jums reikia patikrinti vieno paspaudimo programas, skirtas jūsų varikliui, jei to, ko norite, ten nėra, pateikite užklausą BMW oca temoje. Nov 18, 2024 9:13:28 GMT

dado: GOLF 6 MATCH - include scandinavian DRL lights? does anyone know Nov 18, 2024 10:02:35 GMT

med44: brkica SIL VOUS PLAIT J'AI INSTALER UNE CAMERA SUR UNE GOLF 8 ;ET Jai besoin du fichier 5WA980556B. Nov 19, 2024 0:35:46 GMT

lazar: How do i change app country? bmw features not available Nov 19, 2024 19:18:39 GMT

Deleted: BIuS Nov 20, 2024 1:55:57 GMT

kp55: Hi, Nov 20, 2024 15:29:05 GMT

kp55: I have VW High Beam Assist installed, however in the module under Long Coding some settings are obvious but some are not. Mine was set to left hand drive which I've changed but can anyone who drives a right hand drive please help with settings? Nov 20, 2024 15:36:06 GMT

le4dsoldier: hı Nov 20, 2024 18:39:26 GMT

le4dsoldier: ı need some help, if ı'll buy a normal obdeleven. may ı use longcoding and can ı remove sfd lock Nov 20, 2024 18:40:54 GMT

fliew: Hi All, can anyone help me to reset my 2014 Audi S3 A/C to factory setting with OBD11, thanks. Nov 21, 2024 0:38:03 GMT

t5golf: Hello, I saw in the past a tread about programming/ coding Golf VIII( and other VAG types), for example speed regulation. I saved the list/ tread it on PC but do not find it anymore. Can somone share it? Thx . Nov 21, 2024 7:09:30 GMT

bumble: Does "Confirmation of installation change" in 5F need a Pro or Ultimate license? Nov 21, 2024 10:09:51 GMT

whataboutthis: le4dsoldier if you have a pre 2024 VAG motor that is supported and you have the Pro or Ultimate license you can code Adaptions and long Coding but after 2024 SFD2 STOPS YOU. SFD Can be unlocked but basic plan only allows you to use OCA Nov 21, 2024 16:52:53 GMT

whataboutthis: fliew you need to share more info, car year have you coded in obd11 or vcds etc there is no magic button to revert to factory setting you have to undo all your changes manually in Adaptions and Long Coding you can copy/paste if you have backup Nov 21, 2024 16:54:18 GMT