|
|
Post by miltiadis on Dec 12, 2017 16:17:11 GMT
Hello everyone,
I have a little question regarding adaptation function of obdeleven.
I select the module I want to work with, then select adaptation
after this, the application comes up with a search box and a list of adaptations to perform.
How can I view the "Enter channel" input box, so I could insert the channel number that I want to adapt?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 12, 2017 22:21:19 GMT
miltiadis what car/year and location (can affect what you have)
What were you trying to do and what coding were you using.
|
|
|
|
Post by miltiadis on Dec 13, 2017 10:51:22 GMT
yes, I have just figured out that is vehicle/system dependent.
My vehicle is a LEON FR 1.8 Facelift 2017 (Production october-2017)
but since I pluged into a Golf mk4, I got different adaptation menu (you can specify adaptation channel)
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 13, 2017 14:47:04 GMT
Yes that is correct, I dont know the answer but in my SEAT / VW Experience cars pre 2012 have the older modules and everything is done by channel the new 2013 - 2016 have UDS modules and you have long coding (Bytes and Bits) and textual Adaptions. In 2016 a lot of the names and structure of the cars were changes and I seem to recall some were locked as well. Anyway if it helps I have put some notes about the Pro app and how it works here obdeleven.proboards.com/thread/2095/new-obd11-pro-help might give you some info, if you want anything else added in just shout. and check out the facelift section here obdeleven.proboards.com/board/215/ |
|
