|
Post by alynch30 on Dec 6, 2017 16:34:59 GMT
I'm trying to get Battery charge level on MK7.5 but it seems the labels names did change a bit.
It's supposed to be under Dashboard (17) - Adaptation - "Battery Charge"
I can't find "Battery Charge" in the list.
|
|
|
Post by vwjap on Dec 7, 2017 16:51:28 GMT
No-voltage display: No display?
|
|
|
Post by alynch30 on Dec 7, 2017 21:21:41 GMT
No display at all. If I hold the 00 button it's going to clock but not to Battery
|
|
|
Post by vwjap on Dec 7, 2017 21:44:36 GMT
I meant Dash Adaptions No voltage display change from “no display” to “display”
|
|
|
Post by alynch30 on Dec 8, 2017 15:39:57 GMT
Tried that... I get "(31) Fucntion not available" when I try to save it.
|
|
|
Post by vwjap on Dec 8, 2017 19:16:03 GMT
You tried clearing your app data on your device?
|
|
|
Post by Alynch30_ on Dec 8, 2017 19:42:10 GMT
You tried clearing your app data on your device? What do you mean by clearing my app data?
|
|
|
Post by vwjap on Dec 8, 2017 19:51:36 GMT
Sometimes the Android tablet stops working properly with the app, you get “function not available” when you hold the tick or it won’t go into some menu’s, clearing the data sorts it, but you need to sign in again after clearing it, on tab go to settings/apps/manage app/obdeleven (or something like that) and clear app data, then restart obdeleven, log in and try again
|
|
|
Post by theoldboy on Dec 8, 2017 20:30:22 GMT
have a look at this if you are not sure
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Dec 10, 2017 22:19:12 GMT
|
|
|
Post by vwjap on Dec 12, 2017 20:44:14 GMT
Yep just tried it and it doesn’t work, and then I was not able to select the display after it came up function not available
|
|
|
Post by vwjap on Jan 2, 2018 22:59:41 GMT
I’ve read that there is a part missing off the earth terminal on the battery and this is why it’s not available on the 7.5
|
|
|
Post by dv52 (Australia) on Jan 2, 2018 23:17:59 GMT
^^^^ this is correct, but it's not just a limitation of mk7.5 - it also happens on some mk7. The piece of equipment that hangs off the negative battery terminal clamp looks this (ignore the "yellow gunk" - it's an anti-frosting spray that dealers use down here in Australia): ![](https://i.imgur.com/J5pbsSr.jpg?1) So, the piece-of-kit in the picture is what VW calls the battery monitor control module (J367) -its purpose is to measure every bit of electrical current going-into and out-of the battery. J367 is not a regular member of the CAN network, but rather it is a LIN device that hangs-off the Gateway module (@ address hex19) - so if it's installed, you should see it as a "sub-system" of the Gateway module in the OBD11 scan report. J367 sends battery data to the Gateway module where it is processed and then stored in the car's memory. There is a kind-of "history" function in the car's database that is used to calculate the remaining energy in the battery. SOC (State-Of-Charge)is the reading that is displayed when the tweak is implemented Hence, without J367- it's not possible to measure SOC. Cars with Start Stop have J367 installed because battery health is a critical part of SS. But I understand that even later model cars with J367 installed are not able to display SOC - because the function was removed !! Don
|
|
ci7y
New Member
Posts: 6
|
Post by ci7y on Mar 17, 2019 20:52:36 GMT
i turned this on via apps on obdeleven... wanting to know how to turn it off via coding.... battery charge is missing? and No voltage display cannot change option? doesnt appear?
|
|
ci7y
New Member
Posts: 6
|
Post by ci7y on Mar 17, 2019 22:31:43 GMT
I meant Dash Adaptions No voltage display change from “no display” to “display” hello i can find this but there is no option to turn on or off??
|
|
|
Post by vwjap on Mar 18, 2019 10:39:16 GMT
The options are not on or off, but display or no display
|
|
ci7y
New Member
Posts: 6
|
Post by ci7y on Mar 18, 2019 17:12:28 GMT
The options are not on or off, but display or no display i dont get that option either??!!
|
|