|
|
Post by vanvan551 on Oct 29, 2024 16:19:47 GMT
 hi everyone, the front sensors of my audi a3 8y only activate when I shift into reverse (when i pass reverse gear) or when I press the parking button; Is it possible that they are still active when you approach a wall for example, or that they activate when you drive below 15 km/h? and of course how to code this with obdeleven? thank you in advance for your answers |
|
|
|
Post by dv52 (Australia) on Nov 2, 2024 22:06:31 GMT
vanvan551 : Hi again! I'm more than delighted to be told otherwise - but, AFAIK the short answer to your question is NO, alas! The screenshot in your post is ONLY available as you describe. My guess is that the reason for the prohibition to activate the screen as you want is that it would be distracting (and possibly a safety issue) while the vehicle is being driven forward normally. Don
|
|
|
|
Post by vanvan551 on Nov 4, 2024 7:49:07 GMT
Hi Don, actually it's okay, my question wasn't very well posed. To park the car, when I slowly approach a wall, I wanted the front sensors to trigger and beep so as not to touch the wall (see photo). Now it's good, it works and I think it's this setting in obdeleven: control module 19 long coding PaCo PDC Automatic Activation Thanks Ivan  |
|
|
|
Post by alo0sh on Nov 5, 2024 7:05:47 GMT
did you manage to code? I also want to activate it in my car
|
|
|
|
Post by vanvan551 on Nov 5, 2024 13:46:22 GMT
Yes it works now ; what's working or not in your car ?
|
|
|
|
Post by alo0sh on Nov 5, 2024 15:19:10 GMT
I also want it like your representation.
I just looked under PaCo PDC Automatic Activation it says automatic. is that correct?
|
|
|
|
Post by vanvan551 on Nov 5, 2024 16:05:05 GMT
yes, it's correct. Do you have rear sensors ? front sensors ? rear camera ?
|
|
|
|
Post by alo0sh on Nov 5, 2024 16:16:36 GMT
okay, yes I have front and back sensors and rear camera
|
|
|
|
Post by vanvan551 on Nov 5, 2024 20:48:35 GMT
ok so what is not working ?
|
|
