Hill Start assistance

Hi Guys,

I was wondering if something can be done for helping in hill start.

Currently on a slop I need to push the paddle hard for the car to start driving. I was wondering if something can be done.

From what I understood when you stop on a hill and the 'P' is on, the car is on hold for sometime. when you press the acceleration paddle it still holds for sometime. I was wondering if this time can be shorten?

I looked at these coding, but couldn't understand if any help my situation.


Sensitivity hill start assistant

We can modify the way the wizard acts hill start adapting to our needs or habits.

1 - Module 03 - Electronic brake. Code (40168/20103)

2 - Adaptation

3 - Select - Start Assist slope

4 - Activate one of the three options:

- Normal (default)

- Advance

- Time delay



Tilt hill start assistant

With this modification we can change when we want to be activated depending on the steepness of the slope.

1 - Module 03 - Electronic brake. Code (40168/20103)

2 - Adaptation

3 - Select - Start Assist slope, slope limit

4 - Change the value you want.

A higher value more inclination required for activation

Default 3%

Many thanks!