US lights

Has anyone done that and where do I find "cupholderlights"
US light via CAR menu
US light via CAR menu in any switch position


STG 09 coding
Assistant Open
Byte 17 Bit 2 enable "Cupholder Light (s) installed"
Now in the car menu under "Setup" -> "Light" the point "ambient lighting
Appear in front.
STG 09 adaptation
Daytime running light daytime running light permanent running light additionally activates parking light
New value "active"
Light 0 BLK VL B36
Dimming value AB 100 (at Hallogen desired% value)
Dimming value CD 100
Dimming value EF 0
Dimming value Gh 100
Dimming Direction CD Maximize
Dimming Direction EF Minimize
Dimming Direction GH Maximize
Light function A "Ambient light 2"
Light function B "Not active"
Light function C "Not active"
Light function D "Not active"
Light function E "Not active"
Light function F "flashing left dark phase"
Light function G "Flashing left light phase"
Light function H "Not active"
Light 1 BLK VR B20
Dimming value AB 100 (at Hallogen desired% value)
Dimming value CD 100
Dimming value EF 0
Dimming value Gh 100
Dimming Direction CD Maximize
Dimming Direction EF Minimize
Dimming Direction GH Maximize
Light function A "Ambient light 2"
Light function B "Not active"
Light function C "Not active"
Light function D "Not active"
Light function E "Not active"
Light function F "Flashing right dark phase"
Light function G "Flashing right light phase"
Light function H "Not active"


Now the US light can be controlled via the "ambient lighting front" control
Enable / Disable. 0% is switched off everything from 10% is switched on.