|
|
Post by cosmi137 on Oct 2, 2024 20:04:25 GMT
Hello , recently I installed a auto light switch with a light sensor/humidity ( every thing works fine) but I cannot enable the Coming home /Leaving home
I read someone who have the same problem and it said that he had some code on the blinker and after deleting it CH/LH works , but I tried making every thing as original but it not worked
I tried also with green menu but I don’t have car option
Can someone help me please , thanks you
My car is a golf 7 2016
|
|
|
|
Post by dv52 (Australia) on Oct 2, 2024 20:59:15 GMT
cosmi137: Hi I'm not sure which version hex09 module is on this car. Stuff changed on MY16 Golf mk7's - there are 2 x possibilities: the CH/LH adaptation channels are either grouped under the common "parent name" Comfort illumination, or Außenlicht_uebergreifend. So - search for either of these names in Adaptation in Central electrics module
Here are the channel settings:
CH/LH - General settings
- Comfort illumination/Außenlicht_uebergreifend-Menueeinstellung CHO
LHO > Menuesteuerung aktivieren (this places a switch in the MENU
for the CH/LH function- make sure that this software switch is enabled) - Light sensor-Einschaltgrenze_CHO_LHO > 600 lx (this sets the twilight light-level threshold for CH/LH)
LH settings
Comfort illumination/Außenlicht_uebergreifend
- Leaving-Home Verbausstatus > Enabled
- Menueeinstellung Leaving-home Zeit per BAP > 60 seconds (this sets the on-time for LH in MENU)
- Menuesteuerung Leaving-home Freischaltung per BAP > active
CH settings
Comfort illumination/Außenlicht_uebergreifend- Coming Home Leuchten > Low beam
- Coming Home Verbaustatus > automatic
- Coming-home Einschaltereignis > driver door
- Menueeinstellung Cominghome > 20 seconds (this sets the on-time for CH in MENU)
- Menuesteuerung Coming Home Werkseinstellung > active
After these channels values are set - you will need to tell the 09 module which lights you want to operate as CH/LH. This envolves changing the settings on the appropriate Leucht-set. However, the exact changes need to be tailored to how the Leuchte-set is currently programmed. To progress this matter, you will need to post-up screenshots of the appropriate Leuchte-set
Don
[/div]
|
|
|
|
Post by cosmi137 on Oct 3, 2024 7:48:24 GMT
|
|
|
|
Post by dv52 (Australia) on Oct 4, 2024 21:54:06 GMT
cosmi137 : Hmm.........the coding changes to the Comfort Illumination channels look OK - but I have no idea what is happening to the Leuchte-set values in your screenshots!! I suggest that you revert the CH/LH channel changes to the Leuchte-sets back to factory values and start again! And do NOT repeat the CH/LH Leuchte-command in an individual Leuchte-set (it's bad coding).
Also, the coding changes to the Comfort Illumination channels created a new entry in the MENU that allows the driver to turn-ON/OFF the CH/LH function (CAR>setup>lights). I suggest that you check the MENU setting to ensure that the CH/LH function is activated.
Don
|
|
|
|
Post by mathi9020010 on Oct 9, 2024 8:30:07 GMT
Try change dimming direction CD6 and CD7 to "maximize"
|
|
