Adjust headlight range after lowering

You can just safely use the screws located on the headlights. I did this myself on my MK8 without Matrix (so no 4B) and it didn't care about the fact that it wasn't in "Basic settings" mode.
Just google for "headlight alignment chart" and with a PH screw (or T6) raise/lower them as needed.

Idiots at VW weren't able to align them so I did it in a flat parking lot on a store side wall, masking tape and a measure tape. Never got "flashed" since and they work flawless.

The adjustment for basic and LED+ headlights are under 09-Central electrics as the headlight are under the control of this module (and also connected to the 09 sub-CAN).
Go to 09-Central electrics then find Basic settings. First start the following basic setting: "Basic headlight adjustment" When this is started, go ahead and adjust your headlights manually with the screws. When finished adjusting, return back to the Basic settings manue and extecute "Acnowledge basic settings". To enter into the adjustment mode, SFD must be unlocked (OBD11 does it automatically unless configured otherwise) and the hood needs to be popped.
Only headlights adjusted this way will hold the adjustment. Adjusting without starting basic settings might damage the headlight adjustment motor, as the system will always try to force the existing basic settings onto the headlight.
Adjustment at certified VW dealers is around 100 euro, but not every workshop has a regloscope - you need to ask several official dealers (mostly larger ones) until you find one that has the equipment. 

Hello, today I was able to test it, and it worked perfectly. Thanks again.