toma
New Member
Posts: 2
|
Post by toma on Sept 24, 2024 16:20:52 GMT
Hello, Can you help me, I need code for removing error because i change halogens blubs to led ( DRL ).
I have OBDeleven with PRO licnence i need only steps for adaptation. Thanks !!!
|
|
|
Post by dv52 (Australia) on Sept 25, 2024 1:13:29 GMT
toma : Hi. OK, so you need to tell the central electrics module to no longer operate the bulbs for the DRLs as incandescent lamps- but instead to use LED settings. As I understand from the other posts in this part of the forum, the KJ model IBIZA uses the following Leuchte-sets for the DRLs. - Leuchte 2SL - left DRL
- Leuchte 3SL - right DRL
So, change the Lasttyp adaptation channel value to 4 - LED Tagfahrlichtmodul Signal for each Leuchte-set above
Don
|
|
toma
New Member
Posts: 2
|
Post by toma on Sept 25, 2024 12:32:54 GMT
Hi dv52, This worked for me : 09 Central Electrics Adaptation: - Leuchte4TFL LB43 Type of Load 4: change the value to "Allgemeine LED 12W" [Standard: "AllgemeineGluehlampe27W, auchH15-TFL"] - Leuchte5 TFL RB6 Type of Load 4: change the value to "Allgemeine LED 12W" [Standard: "AllgemeineGluehlampe27W, auchH15-TFL"] and there is no error after this. Did i do a good job ?
|
|