|
Post by hrcpin on Sept 19, 2024 6:26:39 GMT
Hy can can someone can help i try to activate Traffic signs recognition and I did everything according to the below everything appears in my menu, but i get massage "the function is not available"
i do this:
STG 5F> Adaptation>
> Channel "Vehicle function list BAP
traffic_sign_recognition_0x21 > activated traffic_sign_recognition_0x21_msg_bus > data Extended
> Channel "Vehicle menu menu_display_road_sign_identification > activated menu_display_road_sign_identification_over_threshold_high > activated
STG A5> Coding> Byte 16> Activate bit 4 (traffic sign recognition )
STG 17> coding> byte 05> activate bit 2 (traffic sign recognition installed)
STG 13> Coding> Byte 01> Activate bit 0 (traffic_sign_detection)
where am i wrong
|
|
OwnerTR
Junior Member
Seat Ateca FR
Posts: 95
|
Post by OwnerTR on Sept 19, 2024 17:13:35 GMT
This modification gives the same "function unavailable" error on my 2021 Ateca vehicle. I think there needs to be a swap code.
|
|
|
Post by hrcpin on Sept 20, 2024 6:10:02 GMT
Yes but what is wrong
|
|