|
Post by soasoas on Sept 14, 2024 23:30:34 GMT
Hi -
Tried searching and sincere appologies to all if I missed it.
Anyway, trying to enable the Acceleration measurement (0-60 / 0-100). I has the lap time and lap statistics available but not acceleration. 2024 8Y US car - I thought it was disabled for US but we could enable through OBDEleven... I know the 8V cards had it as a one click but not sure how to do it for my model.
Thanks
|
|
|
Post by dv52 (Australia) on Sept 15, 2024 2:20:49 GMT
soasoas : Hi. The OCA, or the manual coding tweak will enable the display for the acceleration function on the dash - but an actual measured reading depends entirely on whether the car has an accelerometer chip installed! If you have enabled the display and the readings are constantly zero - my suspicion is that as factory built this car doesn't have the electronic transducer to measure acceleration. Not All RS3s are created equal!! Don
|
|