|
Post by dika421 on Sept 3, 2024 13:19:28 GMT
Hello,
This is my first time using obd11 for changing something and I've used apps. I tried to change the setting for the mirrors to unfold not when unlocking (as it was until now), but to unfold when the ignition is ON. Everything passed ok and now current value is Ignition ON. Sounds ok....but it doesn't work as it is written and as I expected. Now when I unlock the car the mirrors unfold, then immediately fold back and finally unfold again when the ignition is turned on. In the description of the program it says that they should unfold only on ignition. This is not at all as expected. Is this normal for this model?
Is there any way to get the setting and credits back if the change is reverted within some time - 24 hours for example?
Thanks in advance
|
|
|
Post by whataboutthis on Sept 25, 2024 21:51:27 GMT
You have raised this query in the non vag part of the forum and as support dont look at the forum you are much better off raising the query directly with OBD11 Support via the in app help function or email support@obdeleven.com
Normally (but no guarantee) they refund credits if the app does not work and make sure you point them at your post so they can see you raised the query when the error occurred.
|
|
|
Post by arcticcarapace on Oct 4, 2024 6:24:13 GMT
yeah, definitely reach out to obd11 support. they're usually pretty helpful.
|
|