Post by sameftek on Aug 14, 2024 19:59:25 GMT
I have been at this project for months now and I am keep hitting an dead ends.
I am trying to do a retrofit for Lane assist, I wan to get the Module A5 which is the Camera R242. My car did not come with camera A5 but the windshield included the right hosing for the camera. It also came with the heater for the camera. I went to Aliexpress and purchased retrofit cable. I bought two version of front Camera off eBay.
2Q0-980-653-B - Came from a 2021 Arteon according to the seller.
2Q0-980-653-C - According to the VW parts this part number should work with 2021-2023 Arteon.
I got my car diagram and I wired how the instructions on the diagram says. At J533 You have to unpin t20/7 and t20/17. The plug the harness and then plug the upin into the retrofit harness cable it has a female adapter for it. I did that and plugged it all in with power and ground. I checked the power I get power to the camera with newly installed harness. However When I code it with ODbeleve, it gets coded in, but never turns green. You can see A5 but when you click on it, it says it cannot communicate.
does anyone know, if A5 modules that come used are locked to specific car and they need to be unlocked before you can properly code it in on another car?
I cannot figure out why it is not working. My car was built in 2022 and that was when they had chip shortages and they did not give the A5 camera and the body harness is not cabled with the adapter.
If anyone has any information, please share with me. Perhaps I am not far off and I need like ODIS software to unlock A5 then it will work with my car...
I am trying to do a retrofit for Lane assist, I wan to get the Module A5 which is the Camera R242. My car did not come with camera A5 but the windshield included the right hosing for the camera. It also came with the heater for the camera. I went to Aliexpress and purchased retrofit cable. I bought two version of front Camera off eBay.
2Q0-980-653-B - Came from a 2021 Arteon according to the seller.
2Q0-980-653-C - According to the VW parts this part number should work with 2021-2023 Arteon.
I got my car diagram and I wired how the instructions on the diagram says. At J533 You have to unpin t20/7 and t20/17. The plug the harness and then plug the upin into the retrofit harness cable it has a female adapter for it. I did that and plugged it all in with power and ground. I checked the power I get power to the camera with newly installed harness. However When I code it with ODbeleve, it gets coded in, but never turns green. You can see A5 but when you click on it, it says it cannot communicate.
does anyone know, if A5 modules that come used are locked to specific car and they need to be unlocked before you can properly code it in on another car?
I cannot figure out why it is not working. My car was built in 2022 and that was when they had chip shortages and they did not give the A5 camera and the body harness is not cabled with the adapter.
If anyone has any information, please share with me. Perhaps I am not far off and I need like ODIS software to unlock A5 then it will work with my car...